506500
2
Zoom out
Zoom in
Previous page
1/2
Next page
5019 603 33004
D F NL E P GR
DK
S N FIN
IGB
Freezer compartment temperature adjustment
The appliance is normally factory set to operate at the recommended temperature of -18°C.
To alter the internal temperature between -16°C and -24°C, proceed as follows:
Press button
I/a
or
I/b
once to adjust the internal temperature: the digital display shows the
temperature previously set.
Each time the button is pressed, the temperature setting is changed by 1°C: the value (between
-16°C and -24°C) flashes on the display.
Approximately 5 seconds after the button has been pressed for the last time, the set temperature
is stored, the display stops flashing and the current internal temperature is shown on the display.
Note:
The digital display shows internal temperature values between +10°C and -24°C.
In the event of a power failure, selected functions remain stored in the memory.
Fast freezing
The fast freeze function is automatically deactivated after 48 hours.
Alarm signals
Note:
The temperature alarm may activate if the door is left open for a prolonged period of time or following
the introduction of fresh food in the freezer compartment; this temporary rise in temperature does not
affect the storage of already frozen food in any way.
Defrosting
Control panel lock function
This function prevents anyone inadvertently altering operating parameters or switching the appliance
off. To lock the control panel:
press button J and then button B
and hold down for about 5 seconds,
until the yellow led
G
lights up. To unlock the control panel, press the same buttons again until the
yellow led
G
switches off.
Signal Cause Solution
Door open alarm
The acoustic alarm is
activated
The door has been left open
for more than 1 minute
Close the door
Temperature
alarm
The acoustic alarm and red
led
F
are activated
The internal temperature is
above -12°C
Press button
E
; wait for
the temperature to fall
below -12°C again
Temperature
sensor alarm
The acoustic alarm is
activated and the display
shows
“SF”
Temperature sensor fault Contact After-sales
service
Prolonged power
failure alarm
The acoustic alarm and red
led
F
are activated; the
display flashes, indicating
the highest temperature
reached following the
power failure.
Prolonged lack of power
supply, causing the internal
temperature to rise to very
high values at which correct
food storage cannot be
guaranteed
Press button
E
; the
display now indicates
the current internal
temperture.
1.
Press the freezer on/off button
B
An illuminated dot appears on the digital
display
2.
Unplug the appliance or switch off at the
main switch
3.
Follow the instructions given in the
instructions booklet
4.
Plug in the appliance once again
5.
Press the freezer on/off button
B
. Follow the steps detailed in “Switching on the
appliance”
6Gb33004.fm5 Page 2 Thursday, January 25, 2001 4:32 PM
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht GKEA 245 Optima at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht GKEA 245 Optima in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht GKEA 245 Optima

Bauknecht GKEA 245 Optima User Manual - English - 9 pages

Bauknecht GKEA 245 Optima User Manual - German - 8 pages

Bauknecht GKEA 245 Optima Quick start guide - German - 2 pages

Bauknecht GKEA 245 Optima User Manual - Dutch - 8 pages

Bauknecht GKEA 245 Optima Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info