560997
2
Zoom out
Zoom in
Previous page
1/2
Next page
5019 400 00470
Bauknecht is a registered trademark of Whirlpool USA
Load the laundry, close the door and turn the programme selector to
the desired programme; the
“Start/Pause”
indicator blinks.
The
temperature
and
spin speed
shown on the display can be
altered by pressing the “Temperature” or “Spin” button .
If you do not use the “Dosing Aid” , add detergent now. The
washing machine is designed to save energy; therefore, if you
have selected a programme but do not start it within about a
quarter of an hour, it will switch off automatically.To switch it on
again, turn the programme selector to “Off/O” and then to the
desired programme.
When the combination of programme and additional option(s) is
not possible, the indicators switch off automatically. Unsuitable
combinations of options are deselected automatically.
“15° Green & Clean” button
Enables ecological washing by saving energy used for water
heating, while maintaining a good wash result.
Bright colours live longer with this option; this was tested and
approved by the German “wfk” laundry research institute.
Recommendable for lightly soiled laundry without stains.
Make sure that your detergent is suitable for cold wash
temperatures (15 or 20°C).
Not selectable for Cotton 70 - 95°C.
“Intensive rinse” button
More water is added and rinse cycle is prolonged.
This option is particularly suitable for areas with very soft water
or for washing baby linen, and helps people with allergies.
“Rapid” button
Enables quicker washing by shortening the programme
duration.
Recommendable for only lightly soiled laundry.
Not selectable for Cotton 70 - 95 °C.
“Prewash” button
Adds a prewash cycle to the wash programme selected;
prolongs the programme by about a quarter of an hour.
Recommended for heavily soiled laundry (e.g. with sand or
granular dirt).
Do not use liquid detergent for the main wash when activating
the “Prewash” option.
“Soil level” button
Adapts the programme duration to the soil level of your
laundry. Also influences the detergent quantity
recommendation when using the “Dosing Aid” button.
= lightly soiled - = normally soiled - = heavily soiled
Not all soil levels are selectable for each programme.
“Spin” button (incl. “Rinse Hold” )
Every programme has a predefined spin speed.
Press the button to set another spin speed.
If you select spin speed “0”, the final spinning is cancelled and
the water is drained out only. However, intermediate spin
phases remain during the rinse.
If you select “Rinse hold , the laundry remains in the last
rinse water without progressing to the final spin cycle, to avoid
creasing and prevent colours from changing. To activate the
“Rinse hold”, press the “Spin” button repeatedly until the “Rinse
hold” symbol on the display lights up.
- The wash programme stops to “Rinse hold” when the “Rinse
hold” symbol on the display blinks; the
“Start/Pause”
indicator also blinks.
- To terminate the “Rinse hold” by spinning the laundry, press
“Start/Pause”
- the laundry will be spun with the default
spin speed. You can also select another spin speed with the
“Spin” button before you start the spin cycle with
“Start/
Pause”
.
- To terminate the “Rinse hold” by draining the water without
spinning, press the “Spin” button until spin speed “0”
appears on the display; then press
“Start/Pause”
to start the
CONSUMPTION DATA
Programme Temperature (°C)
Load
(kg)
Water (l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
without “Rapid” with “Rapid”
Mixed 40 4.0 46 0.40 1:00
Cotton 95 7.0 75** 2.25 2:40
Cotton 60 7.0 58 1.19 2:20 1:45
Cotton 40 7.0 65 0.75 2:05 1:15
Synthetics 60 3.0 48** 0.94 1:37 1:12
Synthetics 40 3.0 42 0.40 1:20 0:55
Delicates 40 1.5 60 0.65 0:50
Wool/Handwash 40 1.0 45 0.55 0:40
White 40 7.0 65 0.75 2:20
Light colours 40 4.0 50 0.45 1:20
Dark 40 4.0 40 0.53 1:40 1:15
Cotton *
60 7.0 49 0.66 4:00
Cotton *
60 3.5 35 0.65 3:30***
Cotton *
40 3.5 35 0.56 3:30***
AquaEco 40 3.0 19 0.50 1:00
Speed 15 30 3.0 20 0.08 0:15
Jeans 40 4.0 53 0.46 1:30 1:10
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual
water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.
15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water
supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.
Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options
or changing the spin speed will also change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
Troubleshooting Guide” in your Instructions for Use).
** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
*** Automatic adaptation of programme duration after detection of wash load.
* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle
temperature.
LOAD LAUNDRY, CLOSE DOOR AND
SELECT PROGRAMME
SELECT ANY DESIRED OPTION
draining.
- Do not leave the laundry to soak for too long in the “Rinse
hold” (especially silk!).
With this function you can postpone your programme to complete
at a later time: press the button to select in how many hours the
programme shall be finished. Thus, it allows you to have your
laundry ready at a particular time and to profit from more
favourable energy rates during the night, for example.
The time until the cycle end can be selected in full hour time
segments (1 to 24 h). When you press the button, the shortest
possible time will be displayed; keep on pressing the button to
loop through all the available times. To remove it again, keep
on pressing the button until you see the value “0:00”.
When you have selected the desired time until the cycle end,
press
“Start/Pause”
- the countdown will begin.
During the countdown, you can still modify the programme
setting (select or deselect options, change spin speed etc.).
If the modifications prolong the programme duration so that it
overruns the originally set time until the cycle end, the
programme will start immediately.
Sometimes the programme may finish before the selected time
until the cycle end has expired (e.g. for small loads). In this case,
the washing machine will tumble the laundry regularly to keep it
fresh, until the selected “Finish in” time has expired. During
tumbling, the display will show an animation. The tumbling
phase can be stopped at any time either by pressing any button
or by rotating the programme selector; the animation will stop
and the door will unlock in about 1 minute as indicated on the
display.
With the “Dosing Aid” button, you can make your washing machine
indicate you the recommended detergent quantity for your wash
load, depending on the soil level selected and the size of the load.
Helps to save detergent and protect the environment and also
sensitive skin by avoiding detergent overdosing.
Before you use this function, you must adapt the washing
machine to the dosing amounts which are recommended for
the detergents you use. Also check if your region’s water
hardness corresponds with the water hardness level “soft
of your washing machine - if not adapt it.
Select programme, options and cycle end BEFORE using the
“Dosing Aid” button.
For any details, refer to the separate “Dosing Aid” Instructions for Use.
Before starting and after end of a programme, the lamp lights to
show that the door can be opened. As long as a wash programme
is running, the door remains locked and must on no account be
forced open. In case you have an urgent need to open it during a
running programme, refer to “Reset a running programme before
the end”.
The “Eco monitor” gives you a rough feedback about the power
consumption of the programme setting you selected.
As soon as you turn the programme selector to any programme,
the “Eco monitor” is on.
The indicator on the left is to show that the “Eco monitor” is active.
The four indicators next to it show the degree of consumption:
the less power your programme setting is forecasted to consume,
the less indicators will light up. This depends on the programme,
temperature and options selected, and also on the size of the wash
load. For that reason, the forecasted degree of power consumption
may adapt when the washing machine detects the wash load.
Open the tap and press the
“Start/Pause”
button .
The indicator next to the
“Start/Pause”
button lights up.
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
Turn the programme selector to a programme position, or run
a programme as usual.
Press and hold the 2 buttons marked with the key symbol
simultaneously for a few seconds. A key-like symbol will
shortly appear on the display to indicate that the child lock is
active.
Any time you try to change a programme setting with active
child lock, the display will briefly show the key-like symbol.
The programme setting cannot be changed anymore. The only
change possible is to switch the washer off by turning the
programme selector to the “Off/O” position. To deactivate the child
lock:
Press and hold again the 2 buttons marked with the key symbol
simultaneously for a few seconds.
If one of the failure indicators blinks, consult the “Troubleshooting
Guide” in your Instructions for Use.
“Water tap closed”:
no or not sufficient inlet water.
“Service”:
failure or malfunction of an electrical component.
“Clean pump”:
waste water is not pumped out.
Spin speed on display blinks:
unbalance during spinning.
The “Door open” indicator lights up, and the display shows
“End”. After about a quarter of an hour, the washing machine will
switch off completely to save energy.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
The symbol will light up at the end of the programme if you used
too much detergent. Use less detergent next time. If the symbol
lights up and the display shows “Fod”, too much foam interrupted
the wash process; refer to the “Troubleshooting Guide” in your
Instructions for Use.
1. Press the
“Start/Pause”
button to pause the
programme. The indicator blinks.
2. Select the new programme, temperature, any options and
another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
The
“Reset/Drain”
button cancels a programme before the
end.
Press and hold the
“Reset/Drain
button for a few
seconds; an animation appears on the display. The water is
drained; it may last some time until you can open the door.
SET CYCLE END (Finish in)
DETERGENT DOSING RECOMMENDATION
“DOOR OPEN” INDICATOR
ECO MONITOR
Eco Monitor
less more
PROGRAMME START
CHILD LOCK
FAILURE INDICATORS
PROGRAMME END
DETERGENT OVERDOSAGE INDICATOR
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME
- the sensor technology adapts drum movement, water, energy and programme duration to your wash load.
Power consumption: in off-mode 0.16 W / in left-on mode 0.16 W.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht EXCELLENCE 5770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht EXCELLENCE 5770 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht EXCELLENCE 5770

Bauknecht EXCELLENCE 5770 User Manual - German - 2 pages

Bauknecht EXCELLENCE 5770 User Manual - Dutch - 2 pages

Bauknecht EXCELLENCE 5770 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info