•The lower part of the product must not be accessible after installation.
•Do not t the separator panel if an undertop oven is installed.
•In order to ensure the correct operation of the product, do not obstruct the minimum required clearance between the hob and the top of the unit
(min. 5 mm).
•If an undertop oven is installed, make sure the oven is equipped with a cooling system.
•For built-in dimensions and installation see the picture in this paragraph.
•A minimum distance must be maintained between the hob and the hood above it. Please refer to the user manual of the hood for more informations.
•Do not install the cooktop near a dishwasher or washing machine, so that the electronic circuits do not come into contact with steam or
moisture, which could damage them.
•To remove the hob, use a screwdriver (not provided) to prise o the perimeter clips on the underside of the appliance.
PLACING THE HOB
Apply the supplied gasket to the cooktop (unless it has already been tted), after having cleaned its surface. After the electrical connection (see the
chapter “Electrical connection”), position each xing clips on the dedicated slots on the lateral sides of the hob as shown in the picture. Then push the hob
inside the cut out and check that the glass is at and parallel to the worktop.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bauknecht CHI 6640F IN-01 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bauknecht CHI 6640F IN-01 in the language / languages: English as an attachment in your email.
The manual is 1.02 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
