723437
5
Zoom out
Zoom in
Previous page
1/22
Next page
EN
2. Create an account
If you haven’t done so already, you’ll need to Create
an account. This will enable you to network your
appliances and also view and control them remotely.
3. Register your appliance
Follow the instructions in the app to register your
appliance. You will need the Smart Appliance
IDentifier (SAID) number to complete the registration
process. You can find its unique code the number on
the identification plate attached to the product.
4. Connect to WiFi
Follow the scan-to-connect setup procedure. The app
will guide you through the process of connecting
your appliance to the wireless network in your home.
If your router supports WPS 2.0 (or higher), select
“MANUALLY”, then tap WPS Setup”: Press the
WPS button on your wireless router to establish a
connection between the two products.
If necessary, you can also connect the product
manually using “Search for a network”.
The SAID code is used to synchronise a smart device with
your appliance.
The MAC address is displayed for the WiFi module.
The connection procedure will only need to be
carried out again if you change your router settings
(e.g. network name or password or data provider).
. SETTING THE TIME AND DATE
Connecting the oven to your home network will set
the time and date automatically. Otherwise you will
need to set them manually
Tap the relevant numbers to set the time.
Tap “SET to confirm.
Once you have set the time, you will need to set the
date
Tap the relevant numbers to set the date.
Tap “SET to confirm.
4. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of electrical
power that is compatible with a domestic network that
has a rating of more than 3 kW (16 Ampere): If your
household uses a lower power, you will need to
decrease this value (13 Ampere).
Tap the value on the right to select the power.
Tap “OKAY to complete initial setup.
5. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent
film from the oven and remove any accessories from
inside it. Heat the oven to 200 °C for around one hour.
It is advisable to air the room after using the appliance for the
rst time.
6. FILL THE RESERVOIR
To allow the emission of steam during cooking, this
device is equipped with a reservoir (not visible).
Selecting a recipe or a cycle that requires steaming, the
display will ask you to insert the inlet pipe for loading
water and a led close to the insertion area will turn on.
Connect the pipe without pressing the button. Once the
pipe is completely inserted, you will hear a click.
Please note: There is only one way to connect the pipe
correctly, keeping the push button on the left side.
Then place the end of the pipe in a jug/container filled
with at least 1,7 liters of drinking water. For an optimal
steam performance it is recommended to load the
reservoir with ambient temperature water. If you place
the container on the appliance door, please take care to
place it gently in order to avoid any damage to the door
glass.
Once started, the process will
stop automatically when the
reservoir is filled.
At the end, the display will
prompt to unplug the pipe
pressing the button on its
upper left side and lightly
pulling down.
Please note: In order to avoid any
water leakage, it is
recommended to disconnect the
lling accessory while it is still
inside the drain container; then remove them and close the
door.
Now it is possible to start the cooking cycle or the
desired recipe.
After a long period of non-use of the Steam functions, it is
highly suggested to activate a steam cooking cycle with the
empty oven by lling completely the reservoir.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht BIK11 FPH8TS2 PT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BIK11 FPH8TS2 PT in the language / languages: English as an attachment in your email.

The manual is 21,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht BIK11 FPH8TS2 PT

Bauknecht BIK11 FPH8TS2 PT User Manual - German - 36 pages

Bauknecht BIK11 FPH8TS2 PT User Manual - Dutch - 36 pages

Bauknecht BIK11 FPH8TS2 PT User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info