757194
5
Zoom out
Zoom in
Previous page
1/20
Next page
5
English
When working with the multi saw and
the extension pole, always wear safety
glasses and gloves. Wear a safety hel-
met when working with the multi saw,
where head injuries are to be expected.
To avoid damage to your hearing,
always wear hearing protection.
Alwayswearcut-proofandtight-tting
clothes and safety boots.
3. Before rst use
Remove the accessory from the packaging.
Check the machine for transport damage
and do not use the accessory in case of
damages. Keep the packing materials away
from children, risk of suffocation!
4. Contents of packing
1x Extension pole
1x Instruction manual
5. Intended use
The extension pole is designed for extend-
ing the reach of the multi saw. The equip-
ment is to be used only for its prescribed
purpose.
6. Operation
6.1 Slide the multi saw into the
extension pole.
6.2 Hook the bracket into the saw and fold
the lever down to secure the multi saw
and the extension pole together.
6.3 To remove the multi saw, lift up
the bracket and pull out the saw from
the extension pole.
6.4 Attach both components of the exten-
sion pole together and tighten the
screw cap by turning it counter clock-
wise onto the thread. Only hand- tight
the screw cap.
6.5 Insert the battery into the
extension pole.
6.6 Toswitchonthesaw,rstdepressthe
safety switch (1) and then press the on/
off trigger switch (3) on the handle.
To switch off the multi saw,
release the trigger.
6.7 Please observe the manual of the
multi saw.
7. Accessories
Use only accessories with an allowable
speed matching at least the highest no-load
speed of the tool.
8. Maintenance and Cleaning
WARNING: Always disconnect from the
mains power supply, before carrying out any
maintenance/ cleaning of the charger.
Remove the battery before carrying out any
maintenance/cleaning of the tool.
8.1 Cleaning
Clean the extension pole with a dry or
lightly moistened cloth only. Keep the
contacts free from dust and dirt.
Keep safety devices, ventilation open-
ings and the motor housing as free as
possible from dirt and dust. Rub the
electric power tool with a clean cloth or
blow over it with low pressure com-
pressed air.
We recommend that you clean your
electric power tool immediately after
each use.
Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap. Do not use any cleaning or sol-
vent materials; these can attack the
device’s plastic components. Make sure
that no water can get inside the electric
power tool.
8.2 Maintenance
There are no inner parts of the tool which
need maintenance.
Store the extension pole and the multi saw
always out of reach of children and persons
in need of supervision.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-EXP001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-EXP001 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info