738491

Basetech EM-3000 Manual

4
Zoom out
Zoom in
Previous page
1/12
Next page
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General information
• The unauthorised conversion and/or modication of the product is not allowed for
safety and approval reasons. Do not open/disassemble! Contains no customer-
serviceable parts.
• Maintenance, adjustment or repair work may only be carried out by an expert/
authorised service centre familiar with the hazards involved and the relevant re-
gulations.
• The product is designed according to protection class I. It may only be used when
connected to an earthed mains socket.
• The mains socket to which the product is connected must be easily accessible.
• The product is equipped with a protection against accidental contact. An integra-
ted mechanism will release the holes of the receptacle only, if the two prongs of
a power plug are inserted into the two holes at once.
• Take special caution when children are around. Children cannot recognize the
danger arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
• Do not leave the packaging material lying around carelessly as it may be a dan-
ger to children.
• Handle the product with care; it can be damaged by impacts, blows or falls even
from a low height.
• On industrial sites, the accident prevention regulations of the association of the
industrial workers‘ society for electrical equipment and utilities must be followed!
• If you have any questions that are not answered in this manual, please contact
our technical service or another specialist.
b) Operating location
• The product may only be used in dry interiors; it must not get damp or wet! Never
place the product in the direct vicinity of a bathroom, shower, bathtub or the like.
Lethal hazard due to electric shock!
• The product is not a toy and should be kept out of the reach of children. Position
the product so it is out of the reach of children.
• The product must not be exposed to temperature extremes, direct sunlight or
strong vibrations.
• Do not operate the device in environments where there are high levels of dust,
ammable gases, vapours or solvents. There is a danger of re and explosion!
• Never use the product in a vehicle.
c) Handling and use
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• Never remove a mains plug by pulling on its cable when disconnecting it from the
front socket of the product. Always pull the plug out of the front socket by gripping
the area provided for this purpose on its sides.
• Never overload the product. Observe the connected load in the chapter “Tech-
nical data”.
• Do not connect several measuring devices to each other.
• Do not operate while covered! At higher connected loads, the product becomes
warm, which can lead to overheating and potentially a re if covered!
• Only no longer live if the plug is unplugged!
• Use the product only in a temperate climate, never in a tropical climate.
• Never touch the product or the mains plug with wet or damp hands when trying to
connect a plug to the front socket. There is a risk of fatal electric shock.
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The con-
densation that develops in such cases could damage the device or cause an
electric shock! Allow the product to reach room temperature. Wait until the con-
densation has evaporated. This might take several hours. Only after this, should
it be plugged into the mains supply and put into use.
• Do not use the product if it is damaged. There is a risk of a life-threatening electric
shock!
Operating instructions
Energy cost meter “EM-3000”
Item no. 1611632
Intended use
The product is used to measure and display the power consumption of electric devices. The
product is connected between the mains socket and the electric consumer and requires no ad-
ditional installation. Operation is only admissible when connected to a common mains socket.
The max. admissible power rating of the connected consumer must not be exceeded (see
chapter “Technical data”).
To calculate the costs, an electricity rate can be entered.
The saved data can also be displayed when not connected to a mains socket since in this case,
power is supplied by 2 batteries.
The measuring device is not ofcially calibrated and therefore must not be used for billing
purposes.
It is only suitable for use in enclosed spaces. Outdoor use is not permitted. Contact with humi-
dity; e.g., in bathrooms, must be avoided at all times.
For safety and compliance reasons, the product must not be converted or modied in any way.
If you use the product for other purposes than those described above, the product may be da-
maged. Moreover, improper use involves risks such as short-circuits, re, electric shocks, etc.
Please read the operating instructions carefully and do not discard them. Please include these
operating instructions when you pass the product on to a third party.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Energy cost meter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of perso-
nal injury, such as electric shock.
An exclamation mark inside a triangle indicates important instructions in this opera-
ting manual which must be adhered to.
The arrow symbol indicates specic tips and advice on operation.
The product is only intended to be installed and used in dry indoor spaces; it must
not get damp or wet.
Observe the operating instructions!
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Basetech EM-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Basetech EM-3000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info