Manual Basetech 2106308 (page 4 of 8) (English, German, Dutch, Italian)

738511

Zoom out

Zoom in

1/8

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming or capturing in

electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is

prohibited. This publication reects the technical status at the time of printing.

a) Setting the time formats

Two different time formats can be displayed. To toggle between time formats, press and hold the CLOCK

button (2) until the display changes.

12-hour display 11:59 to 12:00 with AM or PM

24-hour display 00:00 to 23:59

b) Setting the weekday

1. Press and hold the SET button (4) until the day of the week ashes on the display. The days are

displayed in the following order: Mo Tu We Th Fr Sa Su.

2. To scroll through the screen in the order shown, press the “Λ+” button (5). The “V-” button (3) allows to

select the weekdays in reverse order. To scroll through the weekdays faster, press and hold the “Λ+”

or “V-"” button. Release the corresponding button as soon as the desired day of the week is displayed.

3. Conrm your setting by pressing the SET button or wait until the selected day of the week stops ashing.

c) Setting the time of day

After setting the day of the week, the hour indicator lights up on your display. Now set the current time of day.

1. To increase the number of hours, press the “Λ+” button. Pressing the “V-” button allows you reducing the

number of hours. To scroll through the hour display, press and hold the “Λ+” or “V-” button. Release the

corresponding button as soon as the desired number of hours is displayed.

2. Conrm your entry again by pressing the SET button. Then you can set the minutes. Repeat steps 1

and 2 of the time setting.

d) Setting the summer time

1. Press the CLOCK button and the “V-” button simultaneously to switch to summer time. An hour is added

to the current time. The display will show “S” permanently.

2. You can undo this setting by simultaneously pressing the CLOCK- and “S” buttons.

To set the day of the week and time, the time must be shown on the display. If you are in

programming mode, press the CLOCKbutton to return to the time display.

e) Programming mode

The programming mode can be started by pressing the “Λ+” button. “1ON” appears on the display. “1”

indicates the programme group. “ON” means that the device is switched on at the set time. “OFF” means

that the device is switched off at the set time.

1. The programme group can be selected using the “Λ+” and “V-” buttons as described in c) “Setting

the time of day”. The groups are displayed as follows: 1ON, 1OFF … 20ON, 20OFF and d ON/OFF

(Countdown).

When you have selected the desired programme group, press the SET button. You can now select the

desired weekdays or weekday combinations for this programme. To do this, press the “Λ+” button. The

display shows the days of the week or weekday combinations in the following order:

MO TU WE TH FR SA SU

MO → TU → WE → TH → FR → SA → SU

MO WE FR

TU TH SA

SA SU

MO TU WE

TH FR SA

MO TU WE TH FR

MO TU WE TH FR SA

2. Press “V-” button to display the combinations in reverse order.

3. Conrm your setting by pressing the SET button.

4. After the weekday setting, you can now set the associated hours. Please observe steps 1 to 2 in c)

“Setting the time of day”.

5. To set other programme groups or to change your set programme, repeat steps 1 to 4 in this section.

Example:

A device should be activated on Monday between 10:00 and 10:10.

Set the programme 1ON to Mo, 10:00. Your device will be switched on at this time. To switch off the

device at 10:10, set the programme 1OFF to Mo, 10:10. Your device is switched off from this time point.

To reset a programme, enter the programming mode. Select the appropriate programme and

press the ON/OFF button (9).

To return to the time display, press the CLOCK button. Alternatively, the display automatically

returns to the time display after 15 seconds.

f) Countdown

1. The countdown starts from the current real-time display.

2. If you are in the real-time display, press the “V-” button to use the countdown mode. The display will

show “d ON” (or “d OFF”). “d” indicates the activated countdown mode. If “d ON” is set, your device

will be switched on until the counter expires. If “d OFF” is set, your device will be switched off until the

countdown expires.

3. Press the SET button to start the settings. You can set the number of hours, minutes and seconds. To

set the desired number, proceed as described in b) “Setting the weekday”. The number of seconds is

also set equivalent to the number of hours.

4. Press the C.D. button (8) to start the set countdown. Press the C.D. button again to end the countdown

mode.

Press the “V-” button to display the countdown details.

To change your settings, repeat steps 1 to 3 in this section.

g) Random mode

The random mode switches your devices on and off at irregular intervals.

1. Start the random mode by pressing the RND button (7). Your devices will be switched off for 26 minutes

to 42 minutes. The switch-on phases last for 10 minutes to 26 minutes.

2. To disable the random mode, press the RND button again.

Care and cleaning

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the

housing or cause the product to malfunction.

• Disconnect the timer from the mains before cleaning.

• Do not immerse the product in water or other liquids.

• Never open/disassemble the product as it has no parts to be serviced.

• A dry, soft and clean cloth is sufcient for cleaning. Do not press too hard on the housing, as this can lead

to scratch marks.

• Dust can be easily removed using a soft and clean long-haired brush.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste.

At the end of its service life, dispose of the product according to the relevant statutory regulations.

You thus full your statutory obligations and contribute to environmental protection.

Technical data

Operating voltage ................................. 230 V/AC, 50 Hz

Backup rechargeable battery ................ 1x 1.2 V, 40 mAh NiMH rechargeable battery, not interchangeable

Switching capacity ................................ max. 1800 W

Switching current .................................. max. 8 A

Standby power consumption ................ approx. 0.75 W

Protection type ...................................... IP44

Childproof ............................................. yes

Programmes ......................................... max. 140 on and off programmes per week

Time setting interval .............................1 minute (countdown mode 1 second)

Time display .........................................24 or 12 hours

Storage/operating temperature ............. -10 to +50 ° C

Dimensions (W x H x D) ....................... 90 x 134 x 63.5 mm

Weight ..................................................179 g

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Basetech 2106308 in the language / languages: English, German, Dutch, Italian as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Basetech 2106308 Manual

Product: