738538
3
Zoom out
Zoom in
Previous page
1/6
Next page
Also observe the safety and operating instructions of any other devices that are
connected to this product.
If you have doubts about how the product should be operated or how to safely
connect it, consult a qualied technician.
Maintenance, adjustment and repair work may be carried out only by an expert
or a specialised workshop.
If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Connection and operation
The product‘s design complies with protection class I. Only an earthed mains
socket connected to the public power supply may be used as power supply to
the product.
The mains socket into which the Weekly timer is inserted must be easily acces-
sible.
The product is equipped with a protection against accidental contact. An inte-
grated mechanism will release the holes of the receptacle only, if the two prongs
of a power plug are inserted into the two holes at once.
Take special caution when children are around. Children cannot recognize the
danger arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
The product is only intended for use in dry indoor locations. No part of the product
should become damp or wet; never handle it if your hands are wet! Never place
the product in direct vicinity of a bathroom, shower, bathtub or the like. Lethal
hazard due to electric shock!
Use the product only in a temperate climate, never in a tropical climate.
Do not operate the device in environments where there are high levels of dust,
ammable gases, vapours or solvents. There is a danger of re and explosion!
Never use the Weekly timer in a vehicle.
Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The con-
densation that forms might destroy the device. Moreover, there is danger of elec-
tric shock! Allow the product to reach room temperature. Wait until the condensa-
tion has evaporated. This might take several hours. Only after this should the
product be plugged into the power supply and put into use.
Never pull out the power plug from the front socket of the Weekly timer by pull-
ing on its cable. Always pull the plug out of the front socket by gripping the area
provided for this purpose on its sides.
Do not overload the weekday timer switch. Observe the connected load in the
chapter “Technical data”.
Always pull the weekday timer switch out of the mains socket before cleaning it
or when the device will not be in use for a long time.
Never pour any liquids above or next to the product. You run the risk of causing
a re or a fatal electric shock.
If any liquid has still managed to enter the device, immediately turn off the power
supply to the mains socket at which the Weekly timer is connected (turn off the
fuse/circuit breaker/residual current operated circuit breaker of the associated
circuits). Only then can you unplug the weekday timer switch from the mains
socket and contact a specialist. Do not use the product any longer.
Do not connect in series! This can lead to overloading of the weekday timer
switch! There is a risk of re!
Do not operate while covered! At higher connected loads, the weekday timer
switch becomes warm, which can lead to overheating and potentially a re if
covered!
Only voltage-free, when the plug is unplugged!
Never touch a Weekly timer that shows signs of damage, as this could cause a
fatal electric shock!
First, switch off the mains voltage to the socket to which the Weekly timer is
connected (switch off at the corresponding circuit breaker or remove the safety
fuse or switch off at the corresponding RCD protective switch, so that the socket
is fully disconnected).
Only then can you remove the Weekly timer from the mains socket. Do not use
the damaged Weekly timer any longer and dispose of it in an environmentally-
friendly manner.
Operating instructions
Weekly timer, mechanical
Item no. 1528590
Intended use
The product has a socket which can be switched on and off with the integrated mechanical time
switch. Thereby, an electric consumer load can be switched on or off automatically.
The product is only intended for use in dry indoor locations.
The product must be connected to a mains socket with earth contact. See chapter “Technical
data” for information on connection and the maximum permissible power consumption of the
connected electrical loads.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Moreo-
ver, the improper use involves risks such as short-circuits, re, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
Weekly timer
Sticker set (type plates)
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which must be adhered to.
The arrow symbol is used when specic tips and information on the operation are
provided.
Observe the operating instructions!
Safety instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material damag-
es resulting from failure to observe the safety instructions and the information
in these operating instructions regarding the proper handling of the product.
Furthermore, in such cases, the warranty/guarantee will be null and void.
a) General
The product is not a toy. Keep out of the reach of children and pets.
Do not leave packing materials unattended. It may become a dangerous play-
thing for children.
Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
Never expose the product to mechanical stress.
If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period
of time or
- has been exposed to considerable strain during transport.
Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Basetech 1528590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Basetech 1528590 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info