554388
20
Zoom out
Zoom in
Previous page
1/22
Next page
EN
page 43
7. SIGNALS AND ALARMS
The alarm messages are displayed, based upon their meaning.
When displaying "PRESS WATER SOFTNER REGENERATION KEY" a total regeneration
is needed (only with optional water softener).
When displaying "DETERGENT LEVEL" add detergent in the detergent tank (only with
optional "Sensor for Chemicals Low Level").
When displaying "RINSE-AID LEVEL" add rinse-aid chemical in the rinse-aid tank (only
with optional "Sensor for Chemicals Low Level").
When displaying "SALT LEVEL" add salt in the container in the wash-tank (only with optional
water softener).
When displaying "SHUT DOOR" means that the open door does not allow the maneuver
tried, or a wash cycle was in progress, when lifting the door.
When displaying "DRAIN WATER IN WASH TANK" means that a full wash-tank does not
allow the maneuver tried.
When displaying "SELF-CLEANING: REMOVE FILTERS AND PRESS START" the machine
requires a self cleaning cycle.
When displaying "SELF-CLEANING CYCLE OVER" the machine ended the self-cleaning
cycle.
Table 3
TYPE OF ALARM CAUSE REMEDIES
B1 BOILER FILLING FAIL
Open the water supply valve and verify a proper water
supplyow.ContactTechnicalService
B2 BOILER PROBE FAIL.
Contact Technical Service
B3 BOILER HEAT. ALARM
Contact Technical Service
B4 RINSING FAILED
TIME OUT RINSE
Contact Technical Service
B5 BOILER OVERHEATING
Contact Technical Service
E1 WATER LOAD FAILED
Open the water supply valve.
Contact Technical Service
E2 TANK PROBE FAIL.
Contact Technical Service
E3 TANK HEATING ALARM
Contact Technical Service
E5 TANK OVERHEATING
Contact Technical Service
E6 TANK DRAINING FAIL.
Checktheoverowpipe.ContactTechnicalService
Z4 TANK SENSOR FAILURE
Contact Technical Service
Z5 TANK HIGH LEVEL Drain and load the tank.
Contact Technical Service
Z6 TANK LOW LEVEL Drain and load the tank.
Contact Technical Service
Z9 REGENERATION FAIL
Contact Technical Service
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher Deltamat TF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher Deltamat TF in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher Deltamat TF

Bartscher Deltamat TF User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info