658715
6
Zoom out
Zoom in
Previous page
1/8
Next page
6 |
7. Repeat step 3 and 4 until all MFDs are assigned to a LED
8. Press the X key to save your settings and return to normal operation
Unassigning an MFD from an ZC2
1. Press and hold the DISP key on the ZC2 for 5 seconds to enter ZC2
configuration mode
- All LEDs on the ZC2 turn red to indicate that the ZC2 is in
configuration mode.
- The configuration dialog is displayed on all MFDs.
2. Use the rotary knob to select the MFD that is to be unassigned
- Selected MFD is identified with a border.
3. Select the Unassign button, or press the MENU key and select the
Unassign option
4. Press the X key to save your settings and return to normal operation
Conguring the next ZC2
Press and hold the DISP key for 1 second to take command of
another ZC2 in configuration mode.
Selecting which MFD to control
Press the DISP key to toggle through the LEDs.
Once a LED has red steady light the ZC2 is in control of the MFD
assigned to that LED.
The MFD controlled by the ZC2 has a small icon on the screen.
ZC2 LEDs
Status Description
Off
The ZC2 is not powered, or no MFD is
assigned to the LED position.
Flashing
The MFD assigned to the LED position is
not active (either Off or still switching On).
Steady
The MFD assigned to the LED position is
ON and ready for ZC2 control.
All LEDs Steady The ZC2 is in configuration mode.
DISP
1 2 3 654
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG ZC2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG ZC2 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info