658717

BandG WTP3 Manual

100
Zoom out
Zoom in
Previous page
1/102
Next page
98
Startup conrmation
Following the loading of the conguration les the unit will report:
WTP3 Startup Complete.......
Serial Port Cong
Each serial port is congured with the settings dened in the conguration les. The following message types
are displayed if the serial devices are congured correctly:
Serial Device : Channel 0 Device 8 Port 0 Congured Successfully
Serial Device : Channel 1 Device 4 Port 0 Congured Successfully
Serial Device : Channel 1 Device 4 Port 1 Congured Successfully
Data Time-out
The following warnings are printed after the startup is complete. They indicate the data in the system is missing
or gone stale. i.e. the data has not been updated within the allowable time-out period.
Warning: “Heel1” is stale, 2.5Sec expired since last update
If this warning appears shortly after startup it usually indicates the data has been dened but no physical
data is on the system. For example, “Heel1” has been dened in sample.d as being an analogue input on CAN
channel 0, Device 1, analogue channel 1. So if the following warning appears it may indicate that we have either
referenced the wrong analogue module (either CAN channel, Device ID or analogue channel) or the device is not
transmitting data on the CAN channel for some other reason.
Datalog Status
Details the conguration of the datalog manager following startup.
Datalog Manager Initialised [datalog manager started]
Start : Racetimer [datalog will start with racetimer]
Duration: 60 [datalog will run for 60 minutes]
Alarm Status
Details the conguration of any alarms (.alm les) in use following startup.
Alarm Cong :
Depth 67 ENABLED [Depth alarm, variable 67 is enabled]
TW_Speed 17 DISABLED [TWS alarm, variable 17 is disabled]
… 100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG WTP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG WTP3 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info