764846
6
Zoom out
Zoom in
Previous page
1/8
Next page
Page 4 56300_97-A Deutsch GS100 Technisches Datenblatt
Anschlusskonfiguration und Einstellung der DIP-Schalter
Konfiguration 1 (Werkseinstellung)
Pumpe 1, 230V, 2 Geschwindigkeiten
Heizung 3.0kW, 230V
Spa-Beleuchtung
10V
VL401 Hauptbedienfeld
Ozon, 230V
(mit Pumpe 1 auf niedrig)
GS100
PN 56300
12-10-12
OFF POSITION
TEST MODUS AUS*
UNBENUTZT, P1, TEMP, LICHT
DUPLEX PANEL
N/A MUSS AUS SEIN
SIEHE PUMPEN TABELLE
60HZ Betrieb
STD, ECON, SCHLAFMS.
GRAD FAHRENHEIT
SIEHE PUMPEN TABELLE
HOHE AMP - HEIZUNG W/P1 HI
*SWITCH 1 IST NORMAL AUS
PUMPEN TABELLE
SWITCH 5 SWITCH 9
GERINGE GESCHW. HOHE GESCHW.
AUS
AUS
2 STUNDEN
15 MINUTEN
AN
AUS
2 STUNDEN
30 MINUTEN
AUS
AN
15 MINUTEN 15 MINUTEN
AN
AN
30 MINUTEN 30 MINUTEN
FOR SUPPLY CONNECTIONS, USE CONDUCTORS
SIZED ON THE BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
ORT Instrument
J23 NETZSTROMVERSORGUNG 2-GESCHW.-PUMPE 1 ALIMENTATION POMPE 1 A 2 VITESSES 2-SPEED PUMP 1
J29 OZONGENERATOR GENERATOROZONE OZONE GENERATOR
J20 BELEUCHTUNG ECLAIRAGE BAIN HYDRO SPA LIGHT
WARNUNG: Hauptschalter ausschalten VOR Veränderung der
DIP-Schalter.
WARNUNG:
Der persistente Speicher (J43) muss zurückgesetzt werden, damit die neue Einstellung der DIP-Schalter greift.
(Siehe Seite für den persistenten Speicher)
Anschluss-Schlüssel
Typische Netzspannung
Typische Netzspannung für Pumpen
_ mit 2 Geschw.
Null (Gemeinsam)
Erdung
ON
3A 250V
J18
12VAC-B
J12
F5
K5
Bedienfeld
an J1
AUX F
J22
J20
LIGHT
K3
K6
J90
K2
T1
230V
J10
115V 115V
J26
K4
K1
VS100C
P/N 24084
_
A
TORQUE RANGE FOR
MAIN TERMINAL BLOCK
(TB1):
27-30 IN
.
LBS.
(31.1-34.5 kg cm)
BONDING GROUND
(INSTALLED)
NEU (BLU)
L1 (BRN)
ERDUNG (GRN)
GROUND - TERRE - ERDE
YELLOW/GREEN
-
JAUNE/VERT- GELB/GRUN
SENSOR B
SENSOR A
HEIZUNG
3.0 KW @ 230VAC
HEIZELEMENT
RADIATEUR
ON POSITION
TEST MODE AN*
P1, LT, TEMP. RUNTER/HOCH
MINI BEDIENFELD
N/A MUSS AUS SEIN
SIEHE PUMPEN TABELLE
50HZ BETRIEB
NUR STANDARD MODUS
GRAD CELSIUS
SIEHE PUMPEN TABELLE
NIEDRIGE AMP–KEINE HZ W/P1 HI
DIP SWITCH #
1
2
3
4
5
6
7
8
9
10
ALLE UNBENUTZTEN SWITCHES SOLLTEN
AUS SEIN
USE COPPER CONDUCTORS ONLY.
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE
.
NUR KUPFERLEITER VERWENDEN
1
2
3
4
1
Position der Taster
2
Taster des Bedienfelds
1=Pumpe 1
3=Temperatur senken
2=Licht
4=Temperatur erhöhen
3
4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balboa GS100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balboa GS100 in the language / languages: German as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info