Manual Balance Meteo RF-WS101 - 975194 (page 4 of 49) (English, Dutch, French)

606444

Zoom out

Zoom in

1/49

been removed from the anemometer before the calibration.

Important: The same calibration (step 1 to 5) is needed for the first set up and every battery

replacement.

1. After mounting the anemometer, loosen the screws on the battery door with a small screwdriver and

open the battery door.

2. Use the compass on the anemometer and turn the wind vane so it is pointing due north.

3. Hold the wind vane pointing due north and do not allow it to turn. Insert 2 pieces of AA batteries

according to the polarity indicated. The red LED indicator above the battery cover of the

anemometer will flash few times right after battery installation. Be sure the vane is pointing due

north at the moment when red LED flashes and the calibration is now completed. Replace the

battery cover and tighten the screws.

4. If the wind vane is not pointing due north when the red LED first flashes, remove batteries and

repeat step 2 & 3.

5. Hold “CHANNEL/SEARCH” buttons on the monitor to search for remote transmitter. Wind direction,

wind speed, wind chill & channel-1 temperature/humidity readings will appear within 10 minutes if

the RF transmission is successful.

5. Selecting a location for the rain gauge

Select a mounting location for the rain gauge that is:

- a flat, level surface and look for a location where the rain gauge can be placed 1 meter or more

above ground level.

- within 30 meter (100 feet) open area from the monitor. Reduce distance if obstacles is between

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Balance Meteo RF-WS101 - 975194 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Balance Meteo RF-WS101 - 975194 Manual

Product: