496279
7
Zoom out
Zoom in
Previous page
1/32
Next page
7
BABY MONITOR EASY CARE Instruction Manual
CONTROLS LAYOUT
Receiver
7. Power on / Battery low indicator
8. Speaker
9. Power On/Off and volume control
10. Channel switch
11. Visual LED alarm
12. DC Jack
Transmitter
1. Power on / Battery low indicator
2. Power On-Off and VOX/continuous switch
3. Channel switch
4. Transmit indicator
5. DC Jack
6. Microphone
2. Operation using the (AC adapter supplied)
The transmitter and the receiver can be operated
o
n AC mains using the supplied 9V AC adapter.
Connect the output plug of adapter to DC jack of
the transmitter (5) and the receiver (12). Connect the
adapter to the mains.
N.B. : The communication range is longest when the
transmitter is operated on AC mains.
OPERATION
A / Transmitter
Switch the transmitter on by setting button 2 to VOX (tripped on voice, recommended) or to ON (continuous
operation). The power on indicator (4) will light up green.
Select either channel 1 or 2 using the Channel Selector Switch 3.
Place the transmitter about 1 m from the cradle, directing the microphone (6) towards the baby.
Under VOX mode, once the built-in microphone picks up any sound from the baby, the transmitter will
automatically switches into transmit mode and the transmit indicator (1) lights up. When the baby stop
making sound, the transmitter will return to standby mode and the transmit indicator goes off.
Under ON (continuous transmission) mode, the transmitter will always transmit no matter the baby is making
any sound or not. This is useful if you want to monitor the slightest sound of the baby. For conventional
supervision, you are advised to use the “VOX” mode.
The condition of the batteries is shown by the indicator (4). When the batteries are flat, the intensity
fades and becomes red.
B / Receiver
Set the power ON/OFF switch (9) to ON position to turn on the unit. The power on indicator (7) will light
up green.
Select the same channel as the emitter using knob 10.
Place the receiver at a reasonable distance away from the transmitter to avoid feedback. Too close a distance
will create a screeching sound.
Once the unit receives a signal from the transmitter, the LED of the visual level meter (11) light up. The louder
the baby’s voice, the more number of LED will be lighted up.
The condition of the batteries is shown by the indicator (7). When the batteries are flat, the intensity fades
and becomes red.
NB : If you hear noises other than your baby's, change to another channel both for the transmitter and receiver.
For more convenience, the receiver
can be carried around using the belt
clip. To remove the clip follow diagram
as shown.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov Easy Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Easy Care in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info