445308
6
Zoom out
Zoom in
Previous page
1/56
Next page
6
3. Press the palm of your hand on
the magnifying side of the mir-
ror and turn in a clockwise direc-
tion to release the side.
4. A spring will then lightly lift the
mirror so that it can be put to
one side. This side is held to the
mirror by a plastic strap. Do not
pull on it too hard.
5. The light bulb that needs to be
replaced can be recognised by
its darkened colour.
6. Gently press on the light bulb
while turning in a counter-clock-
wise direction to remove it.
7. Insert the new light bulb and
press gently while turning in a
clockwise direction to fasten.
8. Carefully replace the magnify
-
ing side of the mirror by aligning
both the spring and the xing
screw located behind this side
with the notch located on the
main part of the mirror. Rest the
palm of your hand on the mag-
nifying side of the mirror and
press down gently. Then turn in
a counter-clockwise direction
until the side is locked in place.
CLEANING AND MAINTENANCE
This lighted mirror is designed
for indoor use. It needs very little
maintenance. If cleaning is neces-
sary, unplug the mirror and allow it
to cool completely. Then wipe the
surface of the mirror with a slightly
damp cloth. Do not turn the mirror
on until it is completely dry.
SAFETY INSTRUCTIONS
WARNING: Polyethylene bags
containing this product, or its
packaging, can be dangerous. To
avoid the risk of suocation, keep
these bags out of the reach of ba-
bies and children. A polyethylene
bag is not a plaything.
WARNING: do not use this appli-
ance near a bath or any other re-
ceptacle with water in it.
If the appliance is used in a bath-
room, unplug it after use. Using
the appliance near a source of
water may be dangerous, even if
the appliance is unplugged. For
greater safety, we recommend
using a residual current device
(RCD) with a tripping current of
not more than 30mA. Ask your
electrician for advice.
Be sure mirror is not in a position
where it can reect sun-light; re-
ected sunlight can cause a re.
Do not immerse the appliance in
water or any other liquid.
Stop using the appliance imme-
diately if the cord is damaged.
The cord must be replaced by the
manufacturer, its after sales ser-
vice or a similarly qualied person
to avoid risk of injury to the user.
Do not leave the appliance unat-
tended while it is plugged in or
in use.
Avoid contact with the appli-
ance’s hot surfaces, in particular,
with ears, eyes, face and neck.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BaByliss 8442E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BaByliss 8442E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info