661219
40
Zoom out
Zoom in
Previous page
1/42
Next page
A
P
P
E
N
D
I
X
39
Troubleshooting (cont.)
Fabric will not feed
through the machine:
1. Is the feed dog free of lint?
2. Is the presser foot pressure dial set right for the
fabric type?
3. Is the needle plate secure on the machine?
4. Is the presser foot height adjustment dial set
correctly for fabric type?
5. The stitch length and/or stitch spacing is not set
correctly for fabric type.
36
11
36
11
40/41
Stitch is unbalanced:
1. Is the bobbin thread tension adjusted properly for
thread weight?
2. Is the bobbin case threaded properly?
3. Is the bobbin case loaded properly?
4. Is the needle bent, broke, and/or worn?
5. Thread is knotted, tangled or of poor quality.
6. Spool cap is not properly attached and/or the
correct size for thread spool.
19
18
18
-
10
11/17
Condition
Cause
See
page(s)
Bobbin Case Thread Jam
In the event thread would get jammed inside the bobbin case during sewing follow steps below
to clear machine:
1. Cut thread(s) close to fabric in order to clear the needle. This will help prevent possible
damage to the needle and/or latch wire.
2. Gently remove the fabric from under the presser foot.
3. Press positioning button to set machine to the loading position and open side cover.
4. Remove bobbin case with bobbin from machine. If necessary, carefully cut any threads that
may prevent you from removing bobbin case. Then refer to Cleaning the Shuttle Hook
(page 36) to clean any loose threads from shuttle area.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Sashiko 2 - BLQK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko 2 - BLQK2 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info