661216
1
Zoom out
Zoom in
Previous page
1/2
Next page
PANTONE2718
K
4-6
4-1 4-2 4-3
4-4
4-5
4-9
2
1
4-8
4-7
2
3
6
5
8
7
4
6
5
4
1
7
8
Quick Reference Guide
Start from
here.
1
2
3
4
Align notch.
Thread
Push here.
Foot Controller
Pedal
Press down.
Return.
Clip the end
of the thread.
Bobbin should be
positioned so it winds
to the left.
Latch Spring
Thread Notch
Extend the thread
out about 10 cm.
Thread Tension
2. Upper Threading
] Adjust bobbin thread to match that of upper thread.
Incorrect thread tension can lead to such undesirable results as loose upper or
lower stitches, puckered seams and thread breakage.
] Raise the needle, place the fabric
under the presser foot, lower the holder,
then test sew.
Stitch Samples
Start
from
here.
Thread
Needle Hole
Flat Side
Right SideLeft Side
Presser Foot
Lift Lever
Raise.
Fabric
Upper
Thread
Lower
Thread
Lower
Thread
Right side of Fabric
Upper
Thread
Lower
Thread
Right side of Fabric
Wrong side of fabric
Upper
Thread
Extend the thread
out about 15 cm.
Special
fabric
Light
weight
fabrics
Middle
weight
fabrics
Heavy
weight
fabrics
Fabric - Thread - Needles
Thread
Silk, Polyester #30 – #50
Polyester #20 – #50
Polyester #20 – #50
Polyester #20 – #50
Polyester #50
Cotton #80
Polyester #60
Silk #50
Silk, Polyester #50
Cotton #60 – #80
Polyester #60
Silk #50
Cotton #20 – #50
Polyester #20 – #50
Silk #20 – #50
Needle (HLX5)
#11 – #14
#11 – #16
#11 – #14
#9
#11
#11 – #14
#11
#14 – #18
#11 – #16
l Selecting the proper needle for use with the fabric and thread
you are working with
] The following chart applies to many different fabric, thread and needle combinations.
Cloth
Velvet
Quilt
Synthetic Suede
Knit
Coating
Lawn
Tricot
Silk Georgette
Wool Georgette
Gingham
Lightweight Jersey
Gabardine, Flannel
Denim
Jersey
Tweed
to increase
needle
thread
tension
to reduce
needle
thread
tension
Correct thread tension
Wrong side of fabric
Thread
1.
Winding the bobbin thread
l
Please start from here.
l
XC2077-151
1
] Speed of bobbin winder is
controlled by foot controller.
Bobbin Winding
Clutch Arm
] Threading recommendations
to accommodate various
thread weights.
l Pass the thread through
the thread tension disks
and up through the
spring.
Quick Reference Guide_E_Front
Quick Bobbin
Threading Device
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Quilters Choice Professional - BLQP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Quilters Choice Professional - BLQP in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Quilters Choice Professional - BLQP

Baby Lock Quilters Choice Professional - BLQP User Manual - English - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info