614492

Baby Lock Evolve BLE8W Manual

27
Zoom out
Zoom in
Previous page
1/92
Next page
When threading is complete, the loose threads should initially interlock on fabric. This is most important when
sewing the chain or cover stitches.
T
H
R
E
A
D
I
N
G
25
Start to Sew
A
B
C
1. Cut all threads to 4 inch (10cm) in length.
2. Place fabric under the presser foot directly below the needles
(fig. A).
3. Lower the presser foot.
4. Turn the handwheel toward you to form 2 or 3 stitches.
5. Start to sew slowly.
6. After the first few stitches, stop and cut excess threads (fig. B).
7. Start the next seam at the toe of the presser foot (fig. C).
8. You only need to raise and lower the presser foot when working
with thick fabrics or when precise positioning is required.
Note: Be careful not to push or pull the fabric. The evolve will feed it
evenly without help.
To Chain-Off of the Fabric
Your evolve will sew a chain off the edge of the fabric. For best results, we recommend to follow the instruc-
tions below.
Overlock stitches-
1. At the end of the seam, gently pull the fabric and thread to the back to chain-off (fig. A).
2. When the desired length is reached, cut the thread chain with the thread cutter located on the left side cover (fig.
B).
3. Start the seam by placing the fabric under the front of the foot (fig. C).
Chain/Cover stitches-
1. At the end of the seam, change the stitch length to 4 and chain needle tension set at a range from 2 to 0.
2. Let the thread flow from the back of the foot 2-4 inches without pulling.
3. Start the seam by placing the fabric under the front of the foot.
A B C
… 27 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Evolve BLE8W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Evolve BLE8W in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info