768618

Baby Jogger City Select Bassinet Kit Manual

3
Zoom out
Zoom in
Previous page
1/20
Next page
3
IMPORTANT -Read these instructions carefully
before use and keep them for future reference.
Your child’s safety may be affected if you do not
follow these instructions.
1 From the existin City Select® seat: Remove
the seat from the seat frame by unsnappin
all of the fabric and unfastenin the velcro®
strap around the footwell.
2 Remove the footwell frame from the upper
seat frame by pressin the buttons on both
sides of the footwell and ently pullin until
the pieces separate.
3 Insert the Foot Bar from the Bassinet Kit into
the seat frame until it clicks into place.
4 Place the Bassinet within the seat frame so
the top of the seat frame is alined with the
top of the Bassinet.
NOTE: The top of the seat frame and top
of the Bassinet are marked “TOP” for your
convenience.
5 Attach the upper U-shaped Bassinet support
rod around the top section of the seat frame on
both sides.
6 Fasten all snaps around the top portion of the
Bassinet to the top portion of the seat frame.
7 Attach the lower U-shaped Bassinet support
rod around the lower section of the seat frame
on both sides.
8 Fasten all snaps around the lower portion
of the Bassinet to the lower portion of seat
frame.
CANOPY - Use your existin seat’s canopy for the
Bassinet canopy.
9 Unzip mesh fabric and set aside. Snap canopy
brackets to both sides of seat frame.
10 Fasten canopy Velcro® to Velcro® on Bassinet.
FOOT COVER
11 Fit Foot Cover around lower portion of Bassinet
and fasten to Velcro® below mountin bracket.
12 Lift canopy Velcro® to reveal the snap location
for the Foot Cover. Snap Foot Cover to this
snap and refasten canopy Velcro®.
13 Alin the Bassinet bracket adapters with the
mountin brackets on your stroller. Press firmly
until the Bassinet clicks into place.
14 The canopy on your Bassinet is multi-
directional and may be adjusted dependin
on the direction of the sun. The mesh canopy
fabric can be attached to the front of the
canopy and used as a bu canopy for your
Bassinet.
IMPORTANT -Veuillez lire ces instructions avant
l’utilisation et arder les pour references futures.
La sécurité de votre enfant peut être affecté.
1 Du sièe présent dans le City Select®, enlever
le tissu du sièe du cadre en déboutonnant
les boutons-pression et défaisant les courroies
Velcro® autour du repose-pied.
2 Enlever le cadre inférieure du sièe du cadre
supérieur du sièe en appuyant sur les
boutons noirs des deux côtés du repose-pied
et en tirant doucement jusqu’à ce que les
pièces soient séparées.
3 Insérer la Barre Pied de la Trousse de Nacelle
dans le cadre du sièe jusqu’à ce qu’il
s’enclenche en place.
4 Placer la Nacelle à l’intérieur du cadre du sièe
pour que le dessus du cadre du sièe soit
aliné avec le dessus de la Nacelle.
REMARQUE: Le dessus du cadre du sièe et
le dessus de la Nacelle sont identifiés par le
mot “TOP” pour vous aider.
5 Attacher la tie de soutien en U supérieure de
la Nacelle autour de la section supérieure du
cadre du sièe sur les deux côtés.
6 Attacher les boutons-pression tout autour de
la partie supérieure de la Nacelle à la partie
supérieure du cadre du sièe.
7 Attacher la tie de soutien en U inférieure de la
Nacelle autour de la section inférieure du cadre
du sièe sur les deux côtés.
8 Attacher les boutons-pression tout autour de
la partie inférieure de la Nacelle à la partie
inférieure du cadre du sièe.
L’AUVENT - Utiliser l’auvent de votre sièe comme
auvent pour la Nacelle.
9 Dérapher le tissu en maille et mettre de côté.
Attacher les supports de l’auvent sur chaque
côté du cadre du sièe.
10 Attacher le Velcro® de l’auvent au Velcro® de la
Nacelle.
COUVREPIED
11 Ajuster le Couvre-Pied autour de la partie
inférieure de la Nacelle et attacher le Velcro®
au support de montae.
12 Relever le Velcro® de l’Auvent pour exposer
l’emplacement du bouton pression pour le
Couvre-Pied. Attacher le Couvre-Pied à ce
bouton-pression et ré-attacher le Velcro® de
l’Auvent.
13 Aliner les supports de raccord de la Nacelle
aux supports de montae de votre poussette.
Appuyer fermement jusqu’à ce que la Nacelle
s’enclenche en place.
14 L’auvent de votre Nacelle est multi-
directionnelle et peut s’ajuster selon la
direction du soleil. Le tissu en maille peut
servir de moustiquaire pour votre Nacelle.
ASSEMBLY INSTRUCTIONS INSTRUCTIONS POUR L’ASSEMBLAGE
ASSEMBLY INSTRUCTIONS • INSTRUCTIONS POUR L’ASSEMBLAGE
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Jogger City Select Bassinet Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Jogger City Select Bassinet Kit in the language / languages: All languages as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info