AXTON C202 C402 C502
Rated power output stereo (at 13.8V) at 4 Ohms (W RMS) min. 2 x 65 2 x 120 4 x 65
Rated power output stereo (at 13.8V) at 2 Ohms (W RMS) min. 2 x 95 2 x 180 4 x 100
Rated power output bridged (at 13.8V) at 4 Ohms (W RMS) min. 1 x 180 1 x 350 2 x 200
Frequency response (Hz) 10 - 30.000 10 - 30.000 10 - 30.000
Total Harmonic Distortion (THD) at 4 Ohms (%) < 0.05 < 0.05 < 0.05
Signal to noise ratio (dB) > 95 > 95 > 95
Channel separation (dB) > 80 > 80 > 80
Crossover slope (dB/oct) 12 12 12
Crossover range low/highpass state-variable (Hz) 40-240 HPF
od. LPF 40-240 HPF od. LPF 40-240 HPF od. LPF
1CH/2CH and 3CH/4CH separat
Recommended power cable cross-section with approx. 5 m (mm
2
) 8-20 20 20
Input impedance (kOhms) 47 47 47
Input sensitivity (V) 0.3V - 12 0.3V - 12 0.3V - 12
Damping factor > 100 > 100 > 100
Thermal cut-off (°C) 80 80 80
Fuse (A) 2 x 15 2 x 25 2 x 25
Recommended main fuse on battery side with 20mm
2
power cable (A) 30-40 60 60
Dimensions (W x H x L in mm) 202 x 61 x 260 202 x 61 x 330 202 x 61 x 330
38
SPECIFICATIONS
I
Specifications subject to change without notice.
AXTON is a registred trademark of ACR AG, Bohrturmweg 1, CH-5330 Zurzach, Switzerland.
C202 402 502 (D+E) 30.04.2001 10:14 Uhr Seite 38