559559
59
Zoom out
Zoom in
Previous page
1/61
Next page
NetWare Connect for ISDN 2.1
Informationen für den Administrator 59
Beachten Sie, daß Änderungen an der Konfiguration erst nach einem
Neustart von NetWare Connect for ISDN wirksam werden. Beenden und
starten Sie dafür NetWare Connect for ISDN an der Server-Konsole mit
den Befehlen nwcstop und nwcstart.
Controllerkonfiguration
Die Controllerkonfiguration bietet für jeden installierten Controller eine
Oberfläche für die Einstellung der controllerbezogenen Parameter an.
Unter Global werden die für jeden ISDN-Controller Interrupt, I/O-
Adresse und D-Kanal-Protokoll angezeigt. Änderungen an diesen Pa-
rametern sind nur auf dem Server direkt möglich, sie werden hier nur
angezeigt und sind schreibgeschützt.
Die Konfiguration der Einstellung für Nebenstellenanlagen können
auch in dieser Oberfläche verändert werden. Es besteht die Möglich-
keit, den Controller für den Betrieb hinter einer Nebenstellenanlagen
freizugeben (siehe auch Abschnitt Konfiguration des/der Controller
in diesem Handbuch).
Wenn die Konfiguration der Nebenstellenanlage für den Server akti-
viert ist, darf dieselbe Einstellung auf den Clients nicht aktiv sein, um
zu vermeiden, daß die Amtsholung doppelt gewählt wird.
Unter RNSI General stehen die controllerbezogenen RNSI-Parame-
ter für die Rufnummernkonfiguration zur Verfügung. Die hier eingetra-
genen Werte werden für die korrekte Rufannahme durch den RNSI be-
nötigt und als sogenannte caller-specified number bei Rückruf an den
Client übertragen.
Ausführliche Informationen zu diesen Einstellungen selbst finden Sie
unter Punkt 4.2 Remote Node Service for ISDN hier in diesem Hand-
buch und im Referenzhandbuch NetWare Connect for ISDN 2.0 In-
stallation and Administration Guide,
S. 90-93 im Abschnitt
Configuring RNSI Parameters for Each ISDN-Controller.
Beachten Sie, daß Änderungen an der Konfiguration erst nach einem
Neustart von NetWare Connect for ISDN wirksam werden. Beenden und
starten Sie dafür NetWare Connect for ISDN an der Server-Konsole mit
den Befehlen nwcstop und nwcstart.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM NetWare Connect for ISDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM NetWare Connect for ISDN in the language / languages: German as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM NetWare Connect for ISDN

AVM NetWare Connect for ISDN User Manual - English - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info