601694
5
Zoom out
Zoom in
Previous page
1/28
Next page
600 Series How to work safely
HOW TO WORK SAFELY
An incorrect or careless operation of the loader may
be the origin of a serious accident. Before putting the
machine into operation, familiarise yourself with the
use of the machine and read and understand this
Operators Manual as well as the safety instructions.
THIS SYMBOL INDICATES
THE IMPORTANT
SAFETY FACTORS.
Understand the limitations of speed, braking, steering
and stability as well as loading capacity of the machine
before starting operation. Make sure that every one
who operates or works with this equipment is familiar
with these safety precautions.
This AVANT loader must only be used for the tasks
and with the attachments approved by the
manufacturer.
If you have no previous experience of the machine,
make sure to do all testing at a safe and open place
with no persons in the area of operation.
SAFETY INSTRUCTIONS
Never use the loader without instructions. Read and
understand all loader signs (decals), and this manual.
Start the operation slowly and carefully.
Do not wear loose clothing, long uncovered hair or
jewelry near machine.
When driving be comfortably seated in the driver´s
seat, keep your feet in their proper place in the footwell
and at least one hand on the steering wheel.
Operate the control levers and the lever of auxiliary
hydraulics only when sitting in the driver´s seat.
Operate the control levers with ease and without
hesitation.
When coupling the attachment, make sure that the
locking pins lock in positively.
Never put any part of the body or let anyone go under
the lifted boom.
Do not transport persons in the bucket or in any other
attachment. The machine is not designed to lift or to
transport persons.
Keep hands, feet and clothing away from any moving
part and/or hydraulic cylinder.
Never carry passengers. Keep other bystanders away
from the work area.
Drive slowly on uneven terrains. Watch out for ditches,
manholes and steep gradients.
Do not drive on too steep a gradient. Load, unload, and
turn on flat level ground.
Make sure that the ventilation is sufficient when working
indoors or otherwise confined area.
Do not use loader in an atmosphere with explosive dust
or gases or where exhaust can contact flammable
material, explosion or fire can result.
Do not transport the load with the boom lifted.
Always carry bucket or attachment as low as possible,
and put the load down whenever you leave the machine.
When lifting or lowering the load, do not operate the
boom control lever abruptly. Turn the lever smoothly
and with care.
Do not exceed rated operating capacity - follow the
load diagrams.
Do not park the machine on a surface with a gradient.
Should this be necessary, use the parking brake and
preferably turn the machine sideways and put down
the bucket. If needed, use chocks behind the wheels.
Before leaving driver´s seat:
- Lower the loader boom
- Place attachment flat on ground
- Stop the engine, remove the key
- Engage the parking brake
Never perform any maintenance or repair operation
when the engine is running.
Stop and cool the engine before adding fuel.
Never use ether or starting fluid on diesel engines with
glow plugs. Use only starting aids as approved by engine
manufacturer.
Keep the engine area clean of flammable materials.
Wear eye protection when servicing, and hard hat or
other protective equipment as needed.
When connecting a booster battery for "jump" start,
always make last connection (negative cable) to engine,
never at battery. When removing the "jump" start cable,
always remove the negative cable (-) from engine first.
Never charge a frozen battery.
Lead acid batteries produce flammable and explosive
gases. Keep arcs, sparks, flames and lighted tobacco
away from battery.
Battery acid causes severe burns. In case of acid contact,
wash immediately with water for several minutes and
get medical attention in case of eye contact.
Use a piece of cardboard to check for hydraulic leaks.
Leaking fluids under pressure can enter the skin and
cause serious injury. Medical attention is required.
Never modify the loader or add attachments not
approved by AVA NT Tecno Oy.
Do not smoke during refueling or driving.
If the loader is transported e.g. on a trailer, make sure
that the articulation joint is securely locked by fitting
the travel lock (painted red) on the left side. Ensure it
is removed before commencing driving again.
When turning with the loader, bear in mind that the
driver´s seat extends beyond the turning radius of the
wheels (collision risk).
Read this Operator's Manual carefully, especially if you
are unfamiliar with the safe use and operation of the
machine.
5
5


Need help? Post your question in this forum.

Forumrules
1

Forum

avant-635

Reset search

  • How to reattach side weight to avant ,bolts snapped off. Submitted on 12-1-2022 at 10:46

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avant 635 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avant 635 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avant 635

Avant 635 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info