734238
3
Zoom out
Zoom in
Previous page
1/27
Next page
-
3
-
Important safety information
User
This device may be used by persons (including children over 8 years of
age) with reduced physical, sensory or mental abilities or lack of
experience and knowledge, if they are supervised or instructed regarding
the safe use of the device and understand the dangers that may arise.
Children may not play with the device. Cleaning and user maintenance of
the device may not be performed by children without supervision. Keep
packaging films out of the hands of children. There is a danger of
suffocation.
Batteries
Keep batteries out of reach of small children. If a battery is swallowed, you
must seek medical attention immediately. Batteries/rechargeable batteries
must always be inserted in the correct polarity. If necessary, clean the
battery and device contacts. Never attempt to recharge non-rechargeable
batteries. Never short-circuit or attempt to open batteries. Never throw
batteries into fire as they may explode.
If the device will not be used for an extended time period, remove the
battery and store the device in a dry and dust-free area. Improper use of
the battery can lead to explosion or leakage.
If the battery leaks, avoid contact with skin, eyes and mucous membranes.
Use gloves. If you are exposed to battery acid, rinse the affected areas
with plenty of clean water and immediately seek medical attention. Remove
discharged batteries from the device as they present an increased risk of
leakage.
-
4
-
Time setting
Carefully pull the crown out all the way. Turn the crown clockwise or
counter clockwise to set the time. Press the crown back to the case to
complete the setting.
Band shortening instruction for model
2-LD4216-2
Band shortening can be accomplished by removing links. Open the band
clasp safety and open the clasp. The band is held to the clasp by a spring
bar. Image 1. Compress and remove the spring bar by using a pointed
tool. Now place the watch face down on a soft surface. Image 2. The
links that can be removed are marked with an arrow. Image 3. Place the
band in the band changing tool in such a way that the pointed end of the
tool points directly at the metal rod. Turn the screw in the direction of the
arrow until the metal rod is pushed out a small distance. The rod can now
be pulled out (using pliers if necessary). The strap can now be taken
disassembled. Remove as many links as necessary using this method.
Reinsert the rod in the opposite direction of the arrow and push it back into
the band. The strap and clasp can now be reassembled.
An instructional video is available for online viewing at the following URL:
http://specials.lidl.com/videos/nou9nohN/
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol 2-LD4216-2 IAN 273985 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol 2-LD4216-2 IAN 273985 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info