705691
16
Zoom out
Zoom in
Previous page
1/17
Next page
16
Troubleshooting
Amplier does not power up.
Check the ground connection.
Check whether the remote DC terminal has at least 10V DC applied.
Check for battery power on the + terminal.
Check all fuses.
If protection LED is lit, shut o the amplier and power it up a bit later again.
High hiss or engine noise in speakers.
Dismiss all connections one after another to identify the fault.
Set the amplier input level as insensitive as possible. Drive a relatively high signal from the head
unit rather than turning the amp‘s input gain too far up.
„Protection“ LED comes on when the amplier is powered up.
Check for shorts on speaker leads.
Check for the volume control on the head unit (should be turned down at powering up).
Remove speaker leads and reset the amplier. If the protection LED still comes on, the device
might be defective.
The amp will shut down automatically when the unit‘s temperature reaches 85°C
Device gets very hot.
Check that the minimum speaker impedance for that model is correct.
Check for speaker shorts.
Check for good airow around the amplier . ln some applications, an external cooling fan may
be required.
Sound is distorted
Checkthat the Level control‘ s is set to match the signal level of the head unit.
Checkthatall crossover frequencies have been properly set .
Check for shorts on the speaker Ieads.
High squeal noise from the speakers
Thls is always caused by a poorly grounded RCApatch cord.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auna AMP490BK - 10028661 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auna AMP490BK - 10028661 in the language / languages: English, German as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info