165824
13
Zoom out
Zoom in
Previous page
1/14
Next page
13
LR 270 DEUTSCH
TECHNISCHE DATEN
BETRIEBSSPANNUNG 11 ÷ 15 VDC
STROMAUFNAHME MIN 1 A
STROMAUFNAHME MAX CONT. (Nominal Leistung) 22 A
NOMINAL LEISTUNG (Tol. +10%; -5%)
2 Kanal x 4 Ohm; 0,3 THD; 12 VDC 70 W (RMS)
LIN. AUSGANGSLEISTUNG (2 Kanal x 4 Ohm; 13,8 VDC) 75 W (RMS)
LIN. AUSGANGSLEISTUNG (2 Kanal x 2 Ohm; 13,8 VDC) 135 W (RMS)
LIN. AUSGANGSLEISTUNG (2 Kanal x 1 Ohm; 13,8 VDC) 210 W (RMS)
AUSGANGSLEISTUNG MONO (4 Ohm; 13,8 VDC) Bridge 270 W(RMS)
AUSGANGSLEISTUNG MONO (2 Ohm; 13,8 VDC) Bridge 420 W(RMS)
LEISTUNG TRI MODE (4 Ohm) 75 + 75 + 270 (W RMS - pulse)
VERZERRUNGEN THD (1 KHz; 90% Nominal Leistung) 0,06 %
FREQUENZBEREICH (-3 dB; Nominal Leistung) 4 Hz - 75 KHz
DÄMPFUNGSFAKTOR (4 Ohm) 120
ANSTIEGSZEIT 4,5 µS
RAUSCHSPANNUNGSABSTAND 100 dBA
EINGANGSEMPFINDLICHKEIT 0,15 V - 1,5 V
EINGANGSIMPEDANZ 15 KOhm
AUSGANGSIMPEDANZ Stereo 1 - 2 - 4 - 8 Ohm
AUSGANGSIMPEDANZ Mono 2 - 4 - 8 Ohm
REMOTE IN 3 - 15 VDC
REMOTE OUT 12 VDC
MUTE IN 3 - 15 VDC
MUTE OUT 12 VDC
ABMESSUNGEN (BxHxT) 175 x 50 x 330 mm
LR 270 FRANÇAIS
DONNEÉS TECHNIQUES
ALIMENTATION 11 ÷ 15 VDC
TEMPS MORT 1 A
CONSOMMATION MAXI (Puissance Nominal) 22 A
PUISSANCE NOMINAL CONTINUE (Toll. +10%; -5%)
2 Ch x 4 Ohm; 0,3% DHT; 12 VDC 70 W (RMS)
PUISS. SORTIE CONTIN. (2 Ch x 4 Ohm; 13,8 VDC) 75 W (RMS)
PUISS. SORTIE CONTIN. (2 Ch x 2 Ohm; 13,8 VDC) 135 W (RMS)
PUISS. SORTIE CONTIN. (2 Ch x 1 Ohm; 13,8 VDC) 210 W (RMS)
PUISS. SORTIE MONO (4 Ohm; 13,8 VDC) Bridge 270 W (RMS)
PUISS. SORTIE MONO (2 Ohm; 13,8 VDC) Bridge 420 W (RMS)
CONNECT. TRI-MODE (4 Ohm) 75 + 75 + 270 (W RMS - pulse)
DISTORSION HARM. TOTALE (1KHz; 90% Puiss. Nom.) 0,06 %
BANDE PASSANTE (-3 dB; Puiss. Nom.) 4 Hz - 75 KHz
COEFFICIENT D'AMORTISSEMENT (4 Ohm) 120
TEMPS DE MONTÉE 4,5 µS
RATIO SIGNAL / BRUIT 100 dBA
SENSIBILITE D'ENTRÉE 0,15 V - 1,5 V
IMPEDANCE D'ENTRÉE 15 KOhm
IMPEDANCE DE SORTIE Stereo 1 - 2 - 4 - 8 Ohm
IMPEDANCE DE SORTIE Mono 2 - 4 - 8 Ohm
ENTRÉE REMOTE 3 - 15 VDC
SORTIE REMOTE 12 VDC
MUE IN 3 - 15 VDC
MUTE OUT 12 VDC
DIMENSIONS (BxHxL) 175 x 50 x 330 mm
LR 230 - LR 250 - LR 270
CONTROLS AND FUNCTIONS
INDICATOR
LIGHTS
FUNCTION
SELECTION
LEVEL CONTROL
INPUTS
ON
Lit when the
amplifier is ON.
MODE
STEREO:
The amplifier is se-
lected as stereo.
MONO IN R:
The amplifier is se-
lected as mono.
Right input is used.
PRE IN
Left - Right inputs
of the amplifier.
They can be used to
amplify the PRE out-
put of a signal source
(radio, CD-DAT), an
electronic crossover
output or an output
of any kind of signal
processor at pream-
plified level.
LEVELS
Level control for the
amplifier output.
Sensitivity varies
from 150mV to
1.5V.
SAFE
When lit it indicates
the intervention of
pro-tection circuits:
in case of overhea-
ting (temperature
exceeding 80° C /
176° F) or output
anomalies (presence
of continuous cur-
rent, short circuit, or
dangerously low load
impedance).
When protection cir-
cuits intervene the
amplifier shuts
down. Turn the am-
plifier off.
When the problem is
corrected turn the
amplifier back on.
16
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audison lr 230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audison lr 230 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info