603185
6
Zoom out
Zoom in
Previous page
1/20
Next page
MX822 - Live mixer with 4 mics + 5 lines + 24-bit DSP, 10 FX and USB port
Page 6
English
4 - Rear panel
5 - Using the USB port
4 - Adjust the gain control settings so the peak LEDs
flash momentarily during sound level peaks:
Note :
- In order to precisely configure a channel, please use the PFL
switch of said channel and adjust the gain so the LED VU meter
occasionally goes beyond O.
- The headphones output will allow you to monitor the volume
settings. This output sends the pre-fade signal (prior to any
channel settings).
1 2 3
1 - Power input socket:
Connect the power supply unit provided for the purpose.
CAUTION: Your mixing desk has been designed to use
the supplied AC adapter only. Using any other power
supply units voids the warranty.
2 - Power switch
4 - Digital audio USB input/output
The MX822 USB port will be detected automatically by your computer
(PC or MAC) as bi-directional sound card. The volume of this output
can be configured via the Tape / CD / USB fader.
The USB port of your mixing desk allows you to play files from your computer, or record the audio mix onto your computer.
The Full Duplex system allows you to simultaneously:
- Send a source from your computer to your mixing desk via multimedia softwares.
- Send a source from your mixing desk to your computer in order to record it via dedicated softwares.
- Your MX12/1624 uses a standard USB Audio Codec protocol (USB audio device), compatible with every recent and updated OS.
- This codec does not require specific drivers to be compatible with your computer.
- Connect a USB A/B cable from your computer to your mixing desk (detected as sound card) and follow your computer instructions in
order to send or receive a signal from your MX12/1624.
- The volume of the USB input/output can be configured via the Tape / CD / USB fader.
CAUTION:
- It is inadvisable to connect or disconnect a USB device when your console is activated, or playing a track from your
computer.
- You cannot connect a USB Mass Storage source (USB key, hard disks...) to this USB port.
5 -Set the MAIN L/R fader on "0".
6 - Adjust the channels levels to get the proper balancing,
then use the MAIN L/R fader to adjust the main volume.
Note :
Deactivate the channels PFL, ALT 3/4 and Tape/CD/USB switches
located below the VU meter to display the main sound levels via
the VU mete
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiophony MX822 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiophony MX822 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audiophony MX822

Audiophony MX822 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info