603186
5
Zoom out
Zoom in
Previous page
1/8
Next page
ENGLISH
DIGITAL-2 - 2-channel DJ mixer with 1 mic and 2 USB ports
Page 5
1 - Mic Level
Adjusts the microphone volume.
2 - Treble (microphone channel)
Adjusts the trebles volume of your microphone.
3 - Bass (microphone channel)
Adjusts the low frequencies volume of your microphone.
4 - PHONO / LINE / USB Switch
Source selector. Channels 1 and 2 feature this function.
5 - Gain
Gain control settings. Channels 1 and 2 feature this
function.
6 - Treble (channels 1 and 2)
Adjusts the trebles volume of channels 1 and 2. Settings
from -15 dB to +15 dB.
7 - Mid (channels 1 and 2)
Adjusts the medium frequencies volume of channels 1
and 2. Settings from -15 dB to +15 dB.
8 - Bass (channels 1 and 2)
Adjusts the low frequencies volume of channels 1 and 2.
Settings from -15 dB to +15 dB.
9 - Master
Adjusts the main volume output.
10 - Phone Level
Adjusts your headphones volume.
11 - Faders (channels 1 and 2)
Adjust the post-equalization output of channels 1 and 2.
12 - VU meter
Channels 1 and 2 LED volume indicator. Try to get sound
levels close to 0 dB to avoid signal distortions.
13 - Cross Fader
Allows you to combine channel 1 signals with channel 2
signals. it is regarded as wearing part and can be easily
dismantled and replaced.
14 - Phone
Allows you to monitor channels 1 and 2 signals via your
headphones, even if faders (11) are at their lowest.
How to monitor:
1 - Two monitoring modes: Split / MIx selector
- Split mode: The phone output is mono: position it on
the left side to monitor channel one and on the right
side to monitor channel 2.
- Mix mode: The phone output is stereo and allows
you to monitor both channels at the same time.
2 - Fader: Adjusting the monitoring sound levels
for each channel
- Push it towards the right to increase channel 2
volume and decrease channel 1 volume.
- On the other hand, push it towards the left to
increase channel 1 volume and decrease channel
2 volume.
15 - Phone output
Stereo Jack 6.35 chassis: connect here your headphones.
16 - Microphone input
Mono Jack 6.35 chassis: connect here your dynamic
microphone.
17 - TALK-OVER Switch
This switch allows you to choose one of the 3 TALK-
OVER modes.
1 - ON: The music volume is decreased by 10 dB.
2 - TALK-OVER: The music level is decreased by 10
dB only when a microphone signal is detected.
3 - OFF: the microphone channel does not prime and
the music level is not altered.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiophony DIGITAL-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiophony DIGITAL-2 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audiophony DIGITAL-2

Audiophony DIGITAL-2 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info