704631
15
Zoom out
Zoom in
Previous page
1/17
Next page
14
Troubleshooting
Problem Solution
The platter does not spin. Is the power cable connected to the outlet? Connect the power cable to the outlet.
Has the power cable plug come off? Check whether or not the plug is properly attached to the product.
The platter spins, but there is
no sound or the volume is not
loud enough.
Is the cartridge’s protector still in place? Remove the cartridge’s protector.
Is the tonearm in the lift position? Lower the tonearm.
Are the function settings and input for connected equipment (amplifier, etc.) selected correctly? Check
whether the settings for the connected equipment are correct.
Is the stylus damaged? Check the stylus and replace it, if necessary.
Is the stylus placed correctly on the body of the cartridge? Check the cartridge and adjust it, if necessary.
Is the tracking force set too heavy? Adjust the tracking force.
The stylus skips. Is the tracking force set too light or too heavy? Adjust the tracking force.
Is the anti-skate set improperly? Verify anti-skate is set for same value as cartridge tracking force.
Is the record warped? Check the record.
Is the record scratched? Check the record.
There is howling. Is the product picking up excessive vibrations from the floor, surfaces of the walls, or nearby speakers?
Decrease the vibrations or mount the product on a surface that is not subject to the effects of vibrations.
Is the product mounted on an unstable surface? Check whether the surface on which the product is
mounted is suitable.
There is noise when the record
is playing.
Is there dust on the cartridge’s stylus tip? If dust is stuck to the stylus tip, clean it with a commercially
sold brush.
The sound when the record is
playing is either too fast or too
slow.
Are the speed settings for the product correct? Use the platter speed buttons to select the correct speed
for the type of record being played.
Is variable pitch engaged? Depress quartz button or return pitch adjust slider to center detent position to
engage quartz lock.
Moving pitch adjust slider
produces no effect.
If the LED next to the pitch adjust slider center detent position remains blue when the slider is moved,
quartz lock is engaged. Depress the quartz button to disengage the quartz lock and activate variable
pitch. The LED should turn off.
Strobe dots are difficult to see
and/or stylus illuminator is very
dim.
Excessively bright or fluorescent light interferes with strobe indicator. Hold hand, record jacket, etc. over
strobe indicator to shield it from bright light.
Humming is heard during
playback.
Is the ground line connected correctly? Make sure the ground line is properly connected.
Is the headshell attached to the tonearm firmly? Make sure the locking ring is tight.
Dimensions
AT-LP140XP
AT-LP140XP
(Unit: mm)
452.0
352.0
158.6
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audio-Technica AT-LP140XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audio-Technica AT-LP140XP in the language / languages: English as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audio-Technica AT-LP140XP

Audio-Technica AT-LP140XP User Manual - German - 17 pages

Audio-Technica AT-LP140XP User Manual - Dutch - 17 pages

Audio-Technica AT-LP140XP User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info