625601
13
Zoom out
Zoom in
Previous page
1/16
Next page
2.0 CASCADE 2 ZONES
• Feed source signal to any of inputs 1 to 5, selected to go to Zone 1 (and set input gain as normal).
• Set Zone 1 speaker EQ OFF and send Zone 1 output to Subwoofer.
• Feed Zone 1 output also to input 6.
• Select input 6 to go to Zone 2. Input 6 gain should be set at an intermediate level (see * below)
• Set Zone 2 speaker EQ ON and send Zone 2 output to the full-range speaker.
• Set Zone 2 volume to maximum – and x it there.
• Zone 1 volume is the “master” control for both outputs.
Advantages: Does not require WMC or special RJ-45 cable
Disadvantages: • The full-range audio signal passes through 2 ADC-DAC systems (resulting in a slight increase in noise
and distortion)
• Source 6 input gain must be specially set
• Operation is not intuitive
• Requires Zone 2 volume and input select controls to be xed (e.g. taped)
* In order to optimise dynamic range, Input 6 gain control should set to produce x1 gain between Input 6 and Zone 2 output (with Z2 Zone
volume at Maximum). If a test signal and AC meter are not available, this can be done approximately using the following procedure.
• Set the input 6 gain to maximum
• Turn gain down until slot in gain control is horizontal
Source signal Z1 output to Subwoofer
Z2 output
to full range speaker
Z1 output also to input 6
To input 6
SOURCE
Select
1 - 5 only
Input gain
set to suit
source
ZONE 1
Speaker Eq
OFF
ZONE 1
Volume Control
is “Master
SOURCE
Select 6
Set Input 6
gain to x1
(see below)
ZONE 2
Speaker Eq
ON
ZONE 2
Fix volume at
Maximum
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audica Multizone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audica Multizone in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info