625602

Audica Microplus Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
plus
channel 1 channel 2 channel 3 channel 4
0dB 0dB 0dB 0dB-3 -3 -3 -3-6 -6 -6 -6-12 -12 -12 -12-18 -18 -18 -18
a) Mains power input
b) Channel 1 gain control. Turn anti-
clockwise to reduce gain and clockwise
to increase gain
c) Channel 1 line level phono input and
paralleled output
d) Channel 2 line level phono input and
paralleled output
e) Channel 2 gain control. Turn anti-
clockwise to reduce gain and clockwise
to increase gain
f) Channel 1 + 2 mode switch. In the
"normal" position, channels 1 and 2
operate as independent channels with a
4 Ohm minimum load capability. In the
"bridged" position channels 1 and 2
operate as a single high output channel
with an 8 Ohm minimum load capability.
See wiring diagram for connection
details.
a - Channel 1 output level meter. The
red 0dB indicator lights when the limiter
function starts to operate.
b - Channel 2 output level meter. The
red 0dB indicator lights when the limiter
function starts to operate.
g) Mains voltage switch. Ensure that this
switch is set to the correct mains voltage
for your region – failure to do so will
result in damage to the unit and
invalidate the warranty.
h) Channel 3 + 4 mode switch. In the
"normal" position, channels 3 and 4
operate as independent channels with a
4 Ohm minimum load capability. In the
"bridged" position channels 3 and 4
operate as a single high output channel
with an 8 Ohm minimum load capability.
See wiring diagram for connection
details.
i) Channel 3 gain control. Turn anti-
clockwise to reduce gain and clockwise
to increase gain
j) Channel 3 line level phono input and
paralleled output
k) Channel 4 line level phono input and
paralleled output
c - Channel 3 output level meter. The
red 0dB indicator lights when the limiter
function starts to operate.
d - Channel 4 output level meter. The
red 0dB indicator lights when the limiter
function starts to operate.
l) Channel 4 gain control. Turn anti-
clockwise to reduce gain and clockwise
to increase gain
m) Loudspeaker output terminals for
channel 1
n) Loudspeaker output terminals for
channel 2
o) Loudspeaker output terminals for
channel 4
p) Loudspeaker output terminals for
channel 3
e - Power on indicator. This will light
constant blue when the power is on.
f - Power on/off button. This is a true
mechanical power switch (not a
standby mode). Its position is
“remembered" even during mains
power failure.
GAIN
GAIN
CHANNEL 3 CHANNEL 4
IN
OUT
IN
OUT
GAIN
CHANNEL 1 CHANNEL 2
IN
OUT
GAIN
IN
OUT
NORMAL
BRIDGED
CHANNEL 1 & 2 BRIDGED CHANNEL 3 & 4 BRIDGED
220-240v~
100-120v~
CH3&4
CH1
CH3
CH4
CH2
CH1&2
SERIAL No.
~50/60Hz
350W
d
e
f
h
i
j
k
l
m
n
p
o
g
a
b
c
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audica Microplus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audica Microplus in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info