769379
33
Zoom out
Zoom in
Previous page
1/34
Next page
Atomos Ronin – User Manual Edition 1: June 2013 31
15. Software updates
Updating AtomOS (Firmware)
From time to time we will issue software updates for your Ronin. To
update the rmware (that’s the software that runs inside your Ronin),
there is a simple procedure you have to follow.
• Go to www.atomos.com/Ronin/firmware
Locate and download the firmware upgrade
1. Extract the file ATOMRON.FW from the firmware zip file.
2. Copy ATOMRON.FW onto a drive in a Master Caddy.
a. Atomos recommends you use a freshly formatted known good disk.
b. Always format your drives in the Ronin. The Ronin formats the drive
for optimal performance for Video.
3. Put 2 freshly charged batteries on your Ronin.
a. It is very important that your Ronin does not lose power during a
firmware upgrade.
b. This is a necessary precaution to make doubly sure that power is
not lost.
4. Power down your Ronin.
5. Insert the Master Caddy with the ATOMRON.FW file.
6. Power up your Ronin with a short press of the Power Button.
7. Watch the screen. Do not remove the Master Caddy until after the
upgrade is complete.
8. The Atomos Logo will appear, and after a few seconds the firmware
upgrade will start.
9. While the firmware upgrade is happening, there will be flashing
coloured lines above and below the Atomos Logo.
10. The firmware upgrade will take up to a few minutes.
11. When the firmware upgrade is finished, the Ronin will:
a. delete ATOMRON.FW from the drive. This is a necessary
precaution for the upgrade procedure.
b. Power itself down.
12. Wait until the Ronin has powered itself down.
13. Turn on your Ronin again with a short press of the Power Button.
14. When the Ronin has booted, Press “MENU” and then “Ronin
Info” and check that the version number is the version expected.
Please ensure your batteries have plenty of charge and that you do
not interrupt your Ronin while its firmware is upgrading. You will see a
randomised colour-bar display on the screen top and bottom of the
screen while updating is taking place. When it is finished, the Ronin
will restart and you will be able to use the device as normal.
Problems when installing AtomOS
Very occasionally, the firmware update process can go wrong. This might
be because of an incomplete or corrupted download.
In the unlikely event of your Ronin becoming unresponsive, there is a
built-in recovery mechanism.
All you have to do is press and hold the on/off button for 10 seconds.
The Ronin will enter emergency firmware update mode, not to its factory
condition.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos Ronin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos Ronin in the language / languages: English as an attachment in your email.

The manual is 2.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info