613607

Atlantic F18 Manual

9
Zoom out
Zoom in
Previous page
1/33
Next page
2) Fixing the comfort temperature :
The comfort temperature is the temperature that you would like while the room is occupied.
a) Set the cursor
to
, the light V2 comes on.
b) Adjust knob to 5, the heating light V1 comes on if the ambient temperature is below the required temperature.
c) Wait for a few hours until the temperature stabilizes.
d) If you are happy with the setting (use a thermometer to check if you wish) mark the position once and for all.
Otherwise, modify the setting and return to item c).
3) Adjusting the Eco temperature :
This involves a reduction in degrees compared to the Comfort temperature. We recommend that you use this mode for periods
of absence of more than 2 hours or overnight.
Warning: This reduction applies to the Comfort temperature so it is important to set the Comfort temperature first, before
setting the Eco reduction.
a) Set cursor
to , indicator light V3 lights up.
b) Set the knob
to –3.5°, the heating indicator light V1 comes on if the ambient temperature is less than the desired Eco
temperature.
c) Wait for a few hours until the temperature stabilizes.
d) If you are happy with the setting (use a thermometer to check if you wish) mark the position once and for all.
Otherwise, modify the setting and return to item c).
NB: The measurement is set to –3.5°C in our laboratories. It is possible that the setting for the reduction is not precisely –3.5°C,
depending on your installation’s particular characteristics. In this case, adapt the setting to obtain the desired reduction.
4) Frost free : HG
❄
This mode keeps the temperature at about 7°C in the room when the house is unoccupied for a long period (usually more than
24 hours).
a) Set the cursor
to
❄
5) The heating light : V1
This light indicates periods during which the resistance is heating.
6) Switching off the device
To set the device to the Off position, move the cursor to
7) Locking the controls
It is possible to lock or limit the range of use of thumb-wheels
to
and lock selector
switch cursor
to prevent the inadvertent manipulation of the device (by children, etc).
a) Detach the device from its wall bracket.
b) On the back of the thermostat box, detach pins P from their supports.
c) Choose position B to lock the thumb-wheels or position L to limit the range of use of
the thumb-wheels.
Choose one of the positions M to lock the person in the desired mode.
8) Programming mode
This device has a thermostat capable of receiving orders through its pilot wire.
It recognizes the following commands:
- CONFORT (comfort) : Temperature set using the thumb-wheel
- CONFORT –1 (comfort –1) : Temperature set using the thumb-wheel
: -1°C
- CONFORT -2 (comfort –2) : Temperature set using the thumb-wheel
: -2°C
- ECO : Temperature set using the thumb-wheel
.
- HORS GEL (frost-free) : Room temperature maintained at approximately 7°C
- ARRET (Off) : Immediate stoppage of the device (used for load-shedding).
To activate the programming mode set cursor
to
In this way, by connecting the pilot wire to a timer, you can program your Comfort and Economy temperature periods. It is possible
to connect several devices to one timer and, in this way, make energy savings.
NB: When there is no command given over the pilot wire, the device heats in the Comfort mode. HG and load-shedding
commands override the Economy and Comfort modes. On changing from the Comfort mode to the Economy mode, the
changeover time is approximately 12 seconds.
N
If
t
T
i
T
d
m
If
a
U
li
A
M
T
c
H
D
a
T
T
W
423749F_M74_B_F18_IN_cor.qxd:1328_M74_B_F18_IN 14/12/07 6:08 Page 8
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atlantic F18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atlantic F18 in the language / languages: English, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info