Manual ATAG WI6255BC (page 48 of 50) (English, German, Dutch, French)

557048

Zoom out

Zoom in

1/50

GB 12

General

Clearance required

The distance between the underside of the extractor hood and the hob

should be at least 550 mm. For gas hobs, this distance should be a

minimum of 650 mm.

Mounting of the hood between two hanging cupboards

• Drill 2 holes of 2,5 mm diameter on the side of the hanging

cupboards as shown in fig. 1 considering also the thickness of the

front panel, so that the hood remains at the same level of the side

hanging cupboards.

• Fix the hood to the hanging cupboards through 4 screws, which are

appropriate to that kind of cupboard.

• Close the space, which eventually remains between the hood

and the wall adjusting the spacer (L) by acting on the appropriate

screws (P) (fig. 1).

Mounting of the hood on the wall

• Drill 6 holes on the wall as shown in (fig. 2). Fix the spacer (L) on

the wall at the right height, according to the depth of the hanging

cupboards (fig. 2).

• Adjust the position of the upper clamps (M) (fig. 2), according to the

depth of the side hanging cupboards.

• Fix the hood on the wall through 4 screws and dowels with

expanding plug , which are appropriate to that kind of wall (ex.

concrete, plasterboard, etc.).

• Fix the hood to the spacer through the screws (P) (fig. 1).

Fixing of the front panel

• Take off the door (E) by removing the grill (G) and pulling at the

same time the special spring locking knobs (H) (fig. 3).

• Fix the door on the front panel through the screws at the level

indicated in (fig. 3).

• Replace the door by inserting it in the upper and lower slides until

the spring locking knobs (H) are released.

ASSEMBLY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG WI6255BC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG WI6255BC Manual

Product: