336557

ATAG ty 3011 m Manual

67
Zoom out
Zoom in
Previous page
1/70
Next page
INSTALLATION INSTRUCTIONS
Top-stone
GB 30
Order in which to build in the appliance
Turn the appliance upside down and place it on the
worktop. Remove the protective foil from the sealing tape
and apply the tape around the cut-out in the worktop. Start
at the rear side of the appliance and tape the sealing strip
along the corners. Make sure that the ends of the sealing
strip fit tightly together.
Measure the thickness of the worktop. Set the control box
to this thickness by correctly positioning the three screws
on the bottom of the control box. The sizes indicated
correspond to the thickness of the worktop.
1.
2.
10 mm
16 mm
20 mm
32 mm
40 mm
10 mm
16 mm
20 mm
32 mm
40 mm
10 mm
16 mm
20 mm
32 mm
40 mm
positioning plate (1x)
control knob (2x)
conical spring (2x)
rosette (2x)
light ring (2x)
screw (4x)
sealing ring (2x)
screw (4x)
pin (2x)
pin Z
hole Y
spring (2x)
nut M4 (2x)
control box
(A)
(B)
(D)
(C)
(E)
INSTALLATION INSTRUCTIONS
Top-stone
GB 31
Use the screws supplied to fasten the positioning plate (A)
against the bottom of the worktop so that the holes are
aligned.
When mounting the knobs into the worktop the sealing
rings (B) should be mounted underneath the light rings.
Place the light rings (B) from the top through the holes in
the worktop and fasten them from the top with the screws
supplied.
Place the springs on the pins (C) and push them from the
bottom through the light rings in the worktop.
Place the conical springs on the control knobs (D).
3.
4.
5.
6.
7.
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ty 3011 m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ty 3011 m in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info