507808
3
Zoom out
Zoom in
Previous page
1/12
Next page
Operating instruction ATAG Premier page 3
Description of the boiler
The ATAG Premier is a room sealed condensing and modulating
central heating boiler which is designed with a hot water facility.
A built in ventilating fan sucks in the combustion air from outside and
provides for a complete premixing of gas and air.
The gas mixture is lead through a ceramic burner which is fitted directly
above the heat exchanger.
Due to the small flame height a compact construction is possible. After
the combustion gasses have passed through the stainless heat
exchanger, they are flued to outside.
Any condensation formed is drained away to waste.
The ATAG Premier E-SHR-T is a boiler designed with an integrated
hot water facility and is provided with a plate-heat exchanger which
supplies a constant water temperature of 60°C.
The unit anticipates the heat required by the heating installation and/
or hot water facility.
By doing so as low as possible heat input is given for the required output.
The boiler is provided with an electrical ignition and energy saving
pump start to prevent waste of energy.
As a result unnecessary system noise is prevented.
When the boiler has been out of operation for a long period of time the
circulation pump will periodically start to prevent seize up. If an outside
sensor has been connected to the unit, the circulation pump will start
automatically when there is a chance of frost. This is the first stage of
frost protection to prevent the danger of freezing.
The efficiency of the boiler is very high and the radiation convection
and standby losses very low. The emission of noxious substances is
far below the fixed standards so the boiler meets the requirements of
SEDBUK Class A and carrys the energy saving logo.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Premier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Premier in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info