692530
55
Zoom out
Zoom in
Previous page
1/58
Next page
GB 28
Connection
e hob is connected according to diagram 230V 2Nac (see the
diagram at the bottom of the appliance). If another connection
is required, let a registered electrical service technician make the
connection.
If you want to make a fixed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fitted in
the supply line.
e power cord is a type Y. is means that the power cord may
only be replaced by the manufacturer, the manufacturers service
organisation or equivalently qualified persons, in order to avoid
dangerous situations.
Common connection:
3 phase and 1 zero connection (3 1N, 400 V ~ / 50 Hz):
e voltage between the phases and the zeros is 230 V ~. º
e voltage between the two phases is 400 V ~.
Fit a connecting bridge between connecting points 4-5.
Phase 3 carries no load. e groups must have fuses of at least
16 A (3x). e core diameter of the connecting cable must be
at least 2.5 mm.
2 phase and 2 zero connection (2 2N, 230 V ~ / 50 Hz):
e voltage between the phases and the zeros is 230 V ~. º
e group must have fuses of at least 16 A (2x). e core
diameter of the connecting cable must be at least 2.5 mm.
e bridges on the connecting block can be used to create the
required connections, as indicated in these illustrations.
Fix the cable with a pull relief and close the cover.
Connecting point, wall-mounting socket and plug must be accessible
at all times.
Electrical connectionINSTALLATION INSTRUCTIONS
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KI6111P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KI6111P in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info