GB 15GB 14
installation guide
building in
fitting the hob
The required cut-out dimension is at least 640 mm
minus the thickness of the worktop.
When the desired cut-out dimension is not available,
the cut-out dimension must begin at least 20 mm
from the front of the cupboard.
installation guide
building in
building in dimensions
Saw the opening in the worktop. This should be done very
accurately (see table). Also saw out any partitions that may
be present.
table
Type of hob HL40..F HL40..G
Cooklight X X
Electrical connection
230 V - 50 Hz X X
15-pin connection plug X X
Appliance width x depth
575x505 mm X X
Built-in height incl. clamps
from top of worktop
59 mm X X
Cut out dimensions
width x depth
560x490 mm X X
Worktop thickness
28 - 50 mm X X
Power of elements
Front left 2300 W
Front left double 2200/1000 W
Rear left 1200 W 1200 W
Rear right 2000 W 2000 W
Front right 1200 W 1200 W
min. 20 mm
