336581
82
Zoom out
Zoom in
Previous page
1/86
Next page
GB 40
INSTALLATION INSTRUCTIONS
Building in
Building in
Check that the cabinet and the cut-out meet the dimension and
ventilation requirements.
Treat the sawn ends of wooden or synthetic worktops with sealing
varnish if necessary, to prevent moisture causing the worktop to swell.
Lay the hob upside down on the worktop.
Fit the connecting cable to the appliance in compliance with the
requirements (see page 39).
Remove the protective layer from the sealing tape and apply the tape
in the groove of the aluminium profile or on the edge of the glass
plate. Do not stick tape round the corners, but cut 4 separate pieces to
seal the corners well.
Turn the hob over and lay it in the recess.
Connect the appliance to the mains. A short bleep will be heard and
all the displays will light up briefly. The appliance is ready for use.
Check that it works properly. If the appliance has been wrongly
connected either a bleep will sound or nothing will appear in the
displays, depending on the error.
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturers service organisation or equivalently
qualifi ed persons, in order to avoid dangerous situations.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG hi 6271 m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG hi 6271 m in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG hi 6271 m

ATAG hi 6271 m Installation Guide - English, German - 2 pages

ATAG hi 6271 m User Manual - German - 90 pages

ATAG hi 6271 m Installation Guide - Dutch, Danish, French - 2 pages

ATAG hi 6271 m User Manual - French - 90 pages

ATAG hi 6271 m Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info