556879
54
Zoom out
Zoom in
Previous page
1/56
Next page
ES 6
ERRORES
Lista de fallos
Si la cocina no funciona de forma adecuada, no significa que esté
defectuosa. En primer lugar, intente resolver el problema usted mismo
comprobando los puntos que figuran a continuación o consulte el sitio
web www.atagservice.nl para obtener mayor información.
SÍNTOMA CAUSA POSIBLE SOLUCIÓN
Huele a gas cerca del
electrodoméstico.
La conexión del
electrodoméstico tiene
una fuga.
Cierre la llave principal del gas. Póngase en
contacto con el instalador.
Uno de los fogones
no se enciende.
No está enchufado.
El fusible está defectuoso
o está desconectado en la
caja de fusibles.
La bujía (1) está sucia o
húmeda.
Las piezas del fogón
no están colocadas
correctamente.
Las piezas del fogón están
sucias o húmedas.
La llave principal del gas
está cerrada.
Fallo en el suministro de gas.
La bombona o tanque de
gas están vacíos.
Usa un tipo de gas
incorrecto.
Enchúfelo correctamente.
Ponga un fusible nuevo o conecte el fusible
automático en la caja de fusibles.
Limpie y seque la bujía.
Utilice las guías para montar las piezas del
fogón.
Limpie y seque las piezas del fogón. Asegúrese
de que los agujeros de salida están abiertos.
Abra la llave principal del gas.
Consulte a su proveedor de gas.
Conecte una bombona nueva o rellene el
tanque.
Asegúrese de que el gas que está utilizando es
apropiado para el electrodoméstico. Póngase
en contacto con el instalador si no lo fuera.
El fogón no
se enciende
uniformemente.
Las piezas del fogón
no están colocadas
correctamente.
Las piezas del fogón están
sucias o húmedas.
Usa un tipo de gas
incorrecto.
Utilice las guías para montar las piezas del
fogón.
Limpie y seque las piezas del fogón. Asegúrese
de que los agujeros de salida están abiertos.
Asegúrese de que el gas que está utilizando es
apropiado para el electrodoméstico. Póngase
en contacto con el técnico si no lo fuera.
El fogón se apaga
una vez encendido.
No se ha mantenido pulsado
a fondo el mando de control
durante suficiente tiempo, al
menos 3 segundos.
El termopar (2) está sucio.
Mantenga el mando de control pulsado a fondo
al menos 3 segundos entre las posiciones alta
y baja. La primera vez puede llevar más tiempo
debido al suministro de gas.
Limpie y seque el termopar.
1
2
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG6411MBB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG6411MBB in the language / languages: English, German, Dutch, Danish, French, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info