69477
36
Zoom out
Zoom in
Previous page
1/42
Next page
6968
MAINTENANCE
general
general
Regular cleaning immediately after use prevents over-cooked food
being able to become ingrained and cause stubborn stains that are
difficult to remove. Use a mild cleaning agent.
Clean the control knobs, burners and pan supports first and then the
spillage well. This avoids the hob getting dirty again during cleaning.
stubborn stains on enamel (pan supports, burner caps, spillage wells)
Remove with a non-abrasive cream or a soft sponge. Never use scouring
powder, scouring pads, sharp objects or aggressive cleansing agents.
cleaning removable burner components
The removable burner components (including wok) are best cleaned with
a mild cleaning product and a soft cloth. In the case of obstinate stains
you can soak the parts in hot suds.
Never use scouring powder, scouring pads, sharp objects or aggressive
cleansing agents.
The burner caps on the wok burner are made of brass. It is normal for
the colour of the brass caps to change as a result of the high temperatures
that occur during use of the wok.
Your appliance has been manufactured from high-grade materials, which
are easy for you to clean.
–Burner parts should not be cleaned in the dishwasher. The parts may
be damaged by the dishwasher detergent!
Do not use too much water as this can penetrate into the burner or
ventilation openings.
Clean the spark plugs preferably with a cloth. Do this carefully. If too
much pressure is applied, the distance from the point of the
sparkplug to the burner may change, causing the burner to ignite
poorly or not at all. The sparkplug will only operate correctly in a dry
environment. If the plug is very dirty, you may clean the point with a
tiny brush.
–Set the pan supports down vertically, without sliding them over the
spillage well.
Assemble the burner parts using the guide ridges.
MAINTENANCE
general
burner cap
burner head
burner ring
burner base
sparkplug
burner head
burner base
sparkplug
thermocouple
thermocouple
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG 9611 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG 9611 A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info