74136
26
Zoom out
Zoom in
Previous page
1/29
Next page
GB 7
controls
igniting and adjusting
GB 6
controls
igniting and adjusting
igniting
HG60..Q
1.
Push the control in and turn it to the full on position.
The burner lights automatically.
If the burner does not ignite within ± 10 seconds, the gas
supply is shut off and all the burners go out. The red indicator
light starts to blink. Turn all the control knobs to their "off"
setting and wait until the indicator light goes out. Then try
again. Now try to light the burner again.
If the burner blows out, it will automatically relight. If the
burner does not relight within approximately 10 seconds, the
gas supply is cut off and all the burners will go out.
If a burner refuses to light, always check:
– that the cover is properly aligned on the burner;
– that the burner is clean and dry.
adjusting
You may set the knob at any position between full-on and
simmer.
0 setting
high setting
low setting
burner indication
igniting HG60..P/HG40..P
1. Press the control knob in.
2. Turn the control knob carefully to the ignition zone.
The burner ignites.
3. Turn the control to the desired setting once the burner is
alight.
If the burner fails to ignite, check if:
– The burner cap is positioned correctly.
– The burner is clean and dry.
adjusting
You may set the knob at any position between full-on and
simmer.
attention!
You can only ignite the burner in the ignition zone.
0 setting
high setting
low setting
burner indication
ignition zone
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG 6011 P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG 6011 P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info