121887
28
Zoom out
Zoom in
Previous page
1/29
Next page
GB 11GB 10
fault
Burner does not burn or ignite
properly.
The spark ignition sparks, but
does not ignite.
The burners suddenly go out.
cause
Burner is dirty or damp.
Burner cap not fitted on the
burner correctly.
The ventilation slots at the rear of
the appliance are blocked.
Appliance is not suitable for the
type of gas used.
The flame protection has shut off
the gas supply.
Sparking plug dirty.
Burner is dirty or damp.
Burner cap not fitted on the
burner correctly.
The gas taps were not turned off
during switching on.
After a cooking time of four
hours, the burners go out
automatically.
solution
Clean and/or dry the burner.
Fit the burner cap on the burner
correctly.
Unblock the ventilation slots.
Check the data plate and contact
service if necessary.
Turn all the control knobs to the
0 setting and ignite the burner
again. If this malfunction happens
again, check whether the burner
caps have been put on the
burners correctly and whether the
burners, ignition pin and/or
ionisation pin are clean and dry.
Clean the sparking plug.
Clean and/or dry the burner.
Fit the burner cap on the burner
correctly.
Turn off all gas taps and relight
the appliance.
Turn off al gas taps and relight the
appliance.
faults
what should I do if…
If the appliance does not work properly, it does not always mean that it is defective. Try
to deal with the problem yourself first. Phone the service department if the advice given
below does not help.
If the light next to the childproof lock starts blinking, this indicates a malfunction. Count
the number of long and short pulses. Error codes lower than ten are indicated by a
number of short pulses. Error codes higher than ten are indicated by a long pulse
followed by a number of short pulses. Error codes higher than twenty are indicated by
two long pulses followed by a number of short pulses. For example, two long pulses
and three short pulses indicates error code 23. Write down the number of pulses on a
piece of paper, so that you can inform the engineer of the indicated error code when he
comes.
maintenance
cleaning
Regular cleaning immediately after use prevents food that
has boiled over from affecting the hob over a period of time
and causing stubborn stains that are hard to remove.
First clean the control knobs, burners and pan supports and
only then the glass top. This prevents the top from becoming
dirty again while you are cleaning.
daily
For daily cleaning of your gas hob, it is best to use a mild
cleaning agent. Do not use too much liquid, since this could
get into the burner or ventilation openings.
stubborn stains on enamel
Remove with a non-abrasive cream or a soft sponge. Never
use scouring powders, aggressive cleaning agents, green
scours.
stubborn stains on stainless steel
Remove with a special stainless-steel cleaning agent. Always
polish in the direction of the surface structure of the stainless
steel. In this way, you will prevent shiny patches occurring.
This damage is excluded from the guarantee. If stains cannot
be removed, clean the hob with the proprietary HG barbecue
grill & oven cleaner. Always treat the whole drip-tray, to
prevent "colour differences". Always treat with a stainless-
steel polish/care product afterwards.
attention!
Remove food remains that have boiled over immediately,
particularly red cabbage, apple sauce and rhubarb. If these
remains are allowed to affect the hob over a period of time,
they can cause discoloration.
Never immerse hot burner caps in cold water. The rapid
cooling can damage the enamel.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG 60 P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG 60 P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info