108868
23
Zoom out
Zoom in
Previous page
1/25
Next page
operation
switching on
automatic continued running
Press the continued running button until the time required is
shown.
You can choose to have the fan switch off after ten minutes
or twenty minutes. The time selected lights up above the
button. The extractor hood automatically switches down, in
steps, from the setting entered to 0. If the lighting was
switched on during the continued running, it remains
switched on.
switching lighting on
Press the lighting button.
The light comes on. The indicator light above the button
lights up.
switching lighting off
Press the lighting button until all the indicator lights above the
button have gone out.
switching extractor hood off
Switch the extractor hood off with the on/ off button.
The fan switches off and the lighting goes out.
grease filter indicator
1 Clean the grease filters when the indicator light above the
grease filter button lights up (see page 8, "maintenance –
grease filters").
The filters are dishwasher-proof.
2 Put the clean filters back.
3 Erase the memory of the grease filter indicator by
keeping a finger on the grease filter button until the
indicator light goes out.
grease filter indicator
button
continued running
button
lighting button
on/off button
GB 6
operation
switching on
introduction
You can set the extraction capacity and continued running time
required on the control panel and erase the memory of the
grease filter indicator. On this and the following pages you can
read how to make use of the facilities.
switching on the extractor hood
Press the on/ off button.
The indicator light above the button lights up. You can now
use the other function buttons.
switching the fan on
Press the fan button until the required setting has been
reached.
If you keep the button pressed, after a few seconds the
setting jumps one setting further (sequence 0-1-2-3-4-3-2-1-0).
The indicator lights above the button show the setting.
intensive setting
Press the fan button until all the indicator lights above the
button light up.
When you release the button, the intensive setting switches
on.
switching the fan off
Press the fan button until all the indicator lights above the
button go out.
When you release the button, the fan switches off.
intensive setting
fan button
on/off button
fan switched off
GB 7
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ES 1011 ZM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES 1011 ZM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info