532085
93
Zoom out
Zoom in
Previous page
1/116
Next page
Syn248 Installation and Configuration Guide Back to Contents
Troubleshooting 92
The device screen displays Synch Failed.
The device screen displays Synchronizing.
Probable Cause Corrective Action
The device synch failed when
trying to connect to the
system.
Reset the device. Disconnect power or insert a
pen or paper clip to press the RESET button for
less than five seconds.
The device was disconnected,
then reconnected after
configuration changes were
made to the system.
See “Reintroducing a Deskset Into the System” on
page 88.
The device was configured
on another network or has
returned to the system after
being deleted from the
system.
Reset to factory defaults by using a paper clip to
press and hold the RESET button for more than
five seconds. See “Reintroducing a Deskset Into
the System” on page 88.
The maximum number of that
type of device has been
reached.
A device must be removed from the network and
deleted from the system before another device
can be added.
The same Deskset extension
number already exists.
Reset the Deskset to factory defaults without the
network cable connected. Use a paper clip to
press and hold the RESET button for more than
five seconds.
Probable Cause Corrective Action
Not enough time has
elapsed.
The device may display Synchronizing for a few
seconds. This is normal and does not indicate a
problem.
This device is the first Syn248
device on the network.
Connect another Syn248 device to the network.
The devices are on different
subnets.
If you use static IP addresses, ensure that the first
three octets of the device IP address matches the
IP addresses of the other system devices.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T SYN 248 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T SYN 248 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info