532085
78
Zoom out
Zoom in
Previous page
1/116
Next page
Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 77
Resetting Devices
You may need to manually restart a device or return a device to factory defaults (see
“Appendix D: Default Settings” on page 106). To reset a device, press the RESET button
shown in Figure 21 and Figure 22 on page 77 by inserting a pen or paper clip into the
hole and applying pressure to the button.
If the device does not respond or fails to synchronize with the system, the device should
be restarted. To restart the device without losing any custom settings, press the RESET
button for less than five seconds. You can get the same result by disconnecting and
reconnecting power to the device.
To completely reset the device to factory defaults, unplug the LAN cable from the device
and press the RESET button for more than five seconds. You might do this if the device
is not synchronized or you want to reset the IP address settings to Auto (DHCP). Any
static IP configurations are lost.
When resetting a Deskset to factory defaults, the User Settings, Personal directory,
Voicemail messages, Call Log, and the Redial list are all deleted. You can use this
complete reset when assigning Desksets to new users. If you do not disconnect the LAN
cable before pressing the RESET button, the extension number is retained. During the
reset, a PC connected to the Deskset PC port momentarily loses network connectivity.
If there is one Gateway in the system, but there are still Desksets connected, then only
the voice prompts and hold messages are deleted; the rest of the Auto Attendant settings
are maintained on the Desksets. If there is another Gateway, the other Gateway
maintains all system configuration settings.
Figure 21. Gateway Reset Button
Figure 22. Deskset Reset Button
To reset the entire system to factory defaults and completely clear the system
of all settings (Auto Attendant, hold message, and System Directory) and
Voicemail messages, unplug the LAN cables from all devices and press the
RESET button for more than five seconds on each device. Then reconnect all
devices to the LAN.
If you have already set up the system, back up the Deskset and system settings
before resetting the device to factory defaults. See “Back Up and Restore
Settings” on page 58.
DC 5.1V
LINE 1
LINE 2 LINE 3 LINE 4 BYPASS
LAN
RESET
LINE 1
LINE 2
LINE 3
LINE 4
POWER
SELECT CANCEL
DOWN
UP
+-
Reset Button
LAN Port
Reset Button
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T SYN 248 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T SYN 248 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info