737279

Aspire Rover 2 Kit Manual

1
Zoom out
Zoom in
Previous page
1/1
Next page
• When using a new coil, let the tank stand for 5
minutes after filling so the cotton can be
saturated with e-liquid before use.
• Do not let the tank become completely empty. Refill
the tank to avoid dry burning or damage to the coil.
SAFETY INFORMATION
For a safe and effective use of this product and its
accessories, we advise you to read the following
instructions in full, and to strictly observe the operating
procedures indicated in this manual and refer to the leaflet
contained in the packaging of the individual products /
accessories.
This product is intended for adult smokers. This product is
not recommended for non-smokers, young people under
the legal age, pregnant or breast feeding women and those
experiencing general ill health.
Keep the product out of reach of Children and minors at all
times
WARNINGS FOR TRANSPORT
Do not keep your device in your pocket while switched on
to avoid inadvertently activating the vaporization device,
causing irreparable damage.
COMPONENTS OF THE PRODUCT
This product is a high-tech product and its components
such as the battery, the micro USB cable, and the tank part
have been specifically made for this product. We
recommend the exclusive use of components and
accessories indicated. Use of components and / or
accessories not specifically produced for this device may
lead to a malfunction and / or damage to the product and
to the cancellation of the guarantee.
WARNINGS BEFORE USE
Products with an internal battery leave the factory already
fully charged. Do not recharge it until the remaining charge
indicator gives the low battery signal. (See Instructions).
The use of an empty, dry or drained tank/pod can cause
immediate damage to the internal resistance and the
consequent cancellation of the guarantee.
WARNINGS WHILE DRIVING
While driving, be sure to strictly observe the laws and
regulations of the country where you are located; stay
focused
on driving and pay attention to traffic
conditions. Do not use this product while driving a
vehicle and keep it separate from other objects in
order to avoid damage from bumps.
GENERAL WARNINGS AND LIMITATIONS OF USE
Do not bring your vape device into contact with water or
other e-liquid. Avoid exposing the device to too low or too
high temperatures (-5 °C / 50 °C). Avoid using the product
in overheated or excessively damp environments. Keep the
product and its accessories away from heat sources. Use
only Aspire original spare parts and accessories. Always
discharge the battery completely before recharging.
Carefully read the composition of the e-liquid before use,
and do not use the product if you are allergic to any of the
components of the e-liquid. Do not use the product if you
suffer from respiratory and / or cardiovascular system
disorders. Do not use the product during pregnancy or
lactation.
Do not ingest or swallow any part of the product or its
accessories and do not try to open or tamper with the
components of the product or its accessories. The device
does not need any flame to light it. To avoid performance
losses, disconnect the battery from the USB charger when
fully recharged, and in the case of anomalies, smell of
burnt or abnormal deformation of one of the components
of the device or its accessories, stop using it immediately
and contact Customer Care.
Avoid direct contact of the e-liquid with the mouth which
could happen if you inhale too strong and too frequently or
if the tank is too full.
Avoid any unauthorized operations that may damage the
product. For an optimal performance of your vape device,
it would be advisable to spend at least 30 seconds
between one inhalation and the next. We recommend only
to use the Aspire wall charger supplied to charge this
device and not attempt to recharge the device with any
other type of charger. We don’t recommend using the
product while charging.
Keep the product and its accessories out of reach of
children, and dispose of the product components at
dedicated collection/disposal points. Do not discard this
product in the environment.
Contents:
1* Nautilus XS Tank (2.0 ml)
1* NX40 Mod (2200 mAh)
2* Coils:
1* Nautilus XS Mesh Coil 0.7Ω (Preinstalled)
1* Nautilus X Coil 1.8Ω
1* Glass Tube
6* O-rings
1* Type-C Cable
1* User Manual
1* Warranty Card
Components View:
Tank Features:
510 drip tip
Very convenient top-filling system
2.0 ml capacity
Adjustable top airflow
Coil parameters:
Nautilus XS mesh coil 0.7Ω (18-22W)
Nautilus X coil 1.8Ω (12-16W)
Dimensions(including drip tip): 22*48 mm
Mod Specifications:
Built-in battery capacity: 2200 mAh
Output wattage range: 1-40W
Output voltage range: 0.5-8.0V
Recommend resistance: 0.2-1.6Ω
Support resistance: 0.2-3.5Ω
Continuous fire time: 10S
Screen: 0.86 inch OLED screen
Type-C charging port
Output modes: VW/VV/BYPASS
Dimensions: 36.5*24.5*65.0 mm
Coil Installation:
1. Unscrew and remove the top cap;
2. Pull to remove the glass tube and change the used coil
with a new one;
3. Replace the glass tube firmly;
4. Put the top cap back onto the tank and screw it.
Safety Features:
1. Automatic Cutoff: The preset continuous fire time is 10
seconds, after 10 seconds of continuous firing, the device will
stop firing and the screen will display “Over 10S” for 5
seconds.
2. Open Circuit Protection: When the connected resistance is
above 3.5Ω or the tank is not connected to the mod, press the
fire button, the device will not function and the screen will
display “No Atomizer” for 5 seconds.
3. Short Circuit Protection: When the device detects a short, it
will stop firing, and the screen will display “Shorted” for 5
seconds.
4. Low Voltage Protection: When the battery level drops below
3.3V, the device will not function and the screen will display
“Low Battery” for 5 seconds to remind you to charge it.
5. Overcharge Protection: When the device is fully charged, it
will stop charging to prevent overcharging of your battery.
6. Overheat Protection: When the temperature of the chip is
above 75℃/167℉, the screen will display “Too Hot” for 5
seconds and the device will cut off.
7.Low Resistance Protection: When the resistance of the
connected coil is lower than 0.2Ω, the screen will display "Lew
Res" for 5 seconds and the device will stop firing.
Instructions:
1. Click the fire button 5 times within 2 seconds to lock or
unlock the mod, when the mod is locked, the screen will
display “Locked Click 5X” for 3 seconds then remain off.
2. Pressing the fire button for 2 seconds in locked mode will
turn the system off, to turn it back on, press the fire button 5
times rapidly.
3. When the device is on, click the fire button 3 times quickly
will turn on/off the screen, when the screen is off, the “+” and
“-” buttons are not functioning, only the fire button works.
Parameter Settings:
1. Pressing the “+” button and fire button simultaneously for 2
seconds to choose your output modes between
“W/V/B”(W=watt, V=voltage, B=bypass).
2. When the mod is in wattage or voltage mode, press “+”/“-”
button to adjust the wattage/voltage value. Press the “+”/“-”
button above 0.5S, the value will change rapidly. When the
output mode is bypass, the wattage/voltage can not be
adjusted.
3. Pressing fire button and “-” button simultaneously will lock
or unlock keys, when the keys are locked, the “+” and “-”
buttons are not functioning, only the fire button works.
4. Pressing the “+” and “-” 10 times in turn will enter the
language set, press “+” or “-” button to select
languages(English or Chinese), press fire button to confirm and
enter.
Charging:
1. Charging the mod via Type-C charging port, the maximum
charging current can reach up to 2A.
2. When connecting the mod to the charger, the screen will
display a growing battery icon. Once the battery level reaches
4.2V or when it’s fully charged, the mod will stop charging, the
screen will shut off.
3. To accomplish 2A charge current, we recommend to use a
wall adapter with an output of 5V/2A.
4. We recommend using only the supplied cable to charge your
mod.
IMPORTANT INFORMATION ABOUT USING NICOTINE
CONTAINING E-LIQUIDS
Before using nicotine containing e-liquid the user should
read the following information carefully.
NICOTINE CONTAINING E-LIQUID:
Do not use if you are allergic to nicotine or any of the other
ingredients contained within the e-liquid (see
manufacturer’s label for full details).
WARNINGS AND PRECAUTIONS:
Nicotine containing e-liquid are not recommended for:
• Non-smokers
• Young people under the legal age;
• Pregnant or breast-feeding women; as nicotine is known
to cross the placenta and to be excreted in breast milk;
• Those experiencing general ill health; such as heart
disease, stomach and duodenal ulcers, liver or kidney
problems, long term throat disease or difficulty breathing
due to bronchitis, emphysema or asthma;
• Those who have an overactive thyroid gland or have a
pheochromocy toma (a tumor of the adrenal gland that can
affect high blood pressure);
• Those who have diabetes, as nicotine may affect your
blood sugar levels.
• Those taking the following medication;
• Theophylline (to treat breathing problems)
• Ropinirole (to treat restless leg syndrome)
• Clozapine (to treat schizophrenia)
POSSIBLE SIDE EFFECTS:
If you inhale too much nicotine or use the product too
much you may experience one or more of the following
effects:
• Feeling faint;
Rover 2 kit User Manual
510 Drip Tip
Airflow Control
Ring
Top Cap
Coil
Glass Tube
Base Hardware
Fire Button
0.86 Inch OLED
Screen
“-” Button
“+” Button
Type-C
Charging Port
Ventilation Holes
Tank Filling:
1. Unscrew and remove the top cap;
2. Add the e-liquid into the tank;
3. Put the top cap back onto the tank and screw it.
• Nausea (feeling sick)
• Headache
• Coughing
• Irritation of the mouth or throat
• Dizziness
• Stomach discomfort
• Hiccups
• Nasal congestion
• Vomiting (being sick)
• Heart palpitations
• Abnormal heart rate
If you experience any of these side effects; including any
possible side effects not listed in this leaflet, discontinue
using the product, if the effect(s) continue after you stop
use, consult your doctor or healthcare professional and
bring this leaflet to their attention.
Safety note:
To avoid misfiring always ensure you either lock or switch
off your device when it is not in use. Especially when
carrying your device in your pocket, bag or purse.
MADE IN CHINA
Manufactured By Eigate
To learn more about our products and how to use, please
visit: www.aspirecig.com
Floor 1-4, Building 3, No.14 Jian'an Road, Shajing
Sub-district, Bao'an District, Shenzhen, Guangdong
Province, China
Tel: +86-755-81499783
Email: service@aspirecig.com
Shenzhen Eigate Technology Co., Ltd.
*Diameter of the tank refill hole.
3
mm


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aspire Rover 2 Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aspire Rover 2 Kit in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspire Rover 2 Kit

Aspire Rover 2 Kit User Manual - German - 1 pages

Aspire Rover 2 Kit User Manual - Dutch - 1 pages

Aspire Rover 2 Kit User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info