Manual Aspire NX40 Mod (page 1 of 1) (English)

737280

Zoom out

Zoom in

1/1

SAFETY INFORMATION

For a safe and effective use of this product and its

accessories, we advise you to read the following

instructions in full, and to strictly observe the

operating procedures indicated in this manual and

refer to the leaflet contained in the packaging of the

individual products / accessories.

This product is intended for adult smokers. This

product is not recommended for non-smokers,

young people under the legal age, pregnant or breast

feeding women and those experiencing general ill

health.

Keep the product out of reach of Children and

minors at all times

WARNINGS FOR TRANSPORT

Do not keep your device in your pocket while

switched on to avoid inadvertently activating the

vaporization device, causing irreparable damage.

COMPONENTS OF THE PRODUCT

This product is a high-tech product and its

components such as the battery, the micro USB

cable, and the tank part have been specifically made

for this product. We recommend the exclusive use of

components and accessories indicated. Use of

components and / or accessories not specifically

produced for this device may lead to a malfunction

and / or damage to the product and to the

cancellation of the guarantee.

WARNINGS BEFORE USE

Products with an internal battery leave the factory

already fully charged. Do not recharge it until the

remaining charge indicator gives the low battery

signal. (See Instructions). The use of an empty, dry

or drained tank/pod can cause immediate damage to

the internal resistance and the consequent

cancellation of the guarantee.

WARNINGS WHILE DRIVING

While driving, be sure to strictly observe the laws

and regulations of the country where you are

located; stay focusedon driving and pay attention to

traffic conditions. Do not use this product while

driving a vehicle and keep it separate from other

objects in order to avoid damage from bumps.

GENERAL WARNINGS AND LIMITATIONS OF USE

Do not bring your vape device into contact with

water or other e-liquid. Avoid exposing the device to

too low or too high temperatures (-5 °C / 50 °C).

Avoid using the product in overheated or excessively

damp environments. Keep the product and its

accessories away from heat sources. Use only Aspire

original spare parts and accessories. Always

discharge the battery completely before recharging.

Carefully read the composition of the e-liquid before

use, and do not use the product if you are allergic to

any of the components of the e-liquid. Do not use

the product if you suffer from respiratory and / or

cardiovascular system disorders. Do not use the

product during pregnancy or lactation.

Do not ingest or swallow any part of the product or

its accessories and do not try to open or tamper with

the components of the product or its accessories.

The device does not need any flame to light it. To

avoid performance losses, disconnect the battery

from the USB charger when fully recharged, and in

the case of anomalies, smell of burnt or abnormal

deformation of one of the components of the device

or its accessories, stop using it immediately and

contact Customer Care.

Avoid direct contact of the e-liquid with the mouth

which could happen if you inhale too strong and too

frequently or if the tank is too full.

Avoid any unauthorized operations that may damage

the product. For an optimal performance of your

vape device, it would be advisable to spend at least

30 seconds between one inhalation and the next. We

recommend only to use the Aspire wall charger

supplied to charge this device and not attempt to

recharge the device with any other type of charger.

We don’t recommend using the product while

charging.

Keep the product and its accessories out of reach of

children, and dispose of the product components at

dedicated collection/disposal points. Do not discard

this product in the environment.

Contents:

1* NX40 Mod (2200 mAh)

1* Type-C Cable

1* User Manual

1* Warranty Card

Components View:

Mod Specifications:

Built-in battery capacity: 2200 mAh

Output wattage range: 1-40W

Output voltage range: 0.5-8.0V

Recommend resistance: 0.2-1.8Ω

Support resistance: 0.2-3.5Ω

Continuous fire time: 10S

Screen: 0.86 inch OLED screen

Type-C charging port

Output modes: VW/VV/BYPASS

Dimensions: 36.5*24.5*65.0 mm

Safety Features:

1. Automatic Cutoff: The preset continuous fire time

is 10 seconds, after 10 seconds of continuous firing,

the device will stop firing and the screen will display

“Over 10S” for 5 seconds.

2. Open Circuit Protection: When the connected

resistance is above 3.5Ω or the tank is not connected

to the mod, press the fire button, the device will not

function and the screen will display “No Atomizer”

for 5 seconds.

3. Short Circuit Protection: When the device detects

a short, it will stop firing, and the screen will display

“Shorted” for 5 seconds.

4. Low Voltage Protection: When the battery level

drops below 3.3V, the device will not function and

the screen will display “Low Battery” for 5 seconds

to remind you to charge it.

5. Overcharge Protection: When the device is fully

charged, it will stop charging to prevent

overcharging of your battery.

6. Overheat Protection: When the temperature of the

chip is above 75 °C/167 °F, the screen will display

“Too Hot” for 5 seconds and the device will cut off.

7. Low Resistance Protection: When the resistance of

the connected coil is lower than 0.2Ω, the screen will

display "Lew Res" for 5 seconds and the device will

stop firing.

Instructions:

1. Click the fire button 5 times within 2 seconds to

lock or unlock the mod, when the mod is locked, the

screen will display “Locked Click 5X” for 3 seconds

then remain off.

2. Pressing the fire button for 2 seconds in locked

mode will turn the system off, to turn it back on,

press the fire button 5 times rapidly.

3. When the device is on, click the fire button 3 times

quickly will turn on/off the screen, when the screen is

off, the “+” and “-” buttons are not functioning, only

the fire button works.

Parameter Settings:

1. Pressing the “+” button and fire button

simultaneously for 2 seconds to choose your output

modes between “W/V/B”(W=watt, V=voltage,

B=bypass).

2. When the mod is in wattage or voltage mode,

press “+”/“-” button to adjust the wattage/voltage

value. Press the “+”/“-” button above 0.5S, the value

will change rapidly. When the output mode is bypass,

the wattage/voltage can not be adjusted.

3. Pressing fire button and “-” button simultaneously

will lock or unlock keys, when the keys are locked,

the “+” and “-” buttons are not functioning, only the

fire button works.

4. Pressing the “+” and “-” 10 times in turn will enter

the language set, press “+” or “-” button to select

languages(English or Chinese), press fire button to

confirm and enter.

Charging:

1. Charging the mod via Type-C charging port, the

maximum charging current can reach up to 2A.

2. When connecting the mod to the charger, the

screen will display a growing battery icon. Once the

battery level reaches 4.2V or when it’s fully charged,

the mod will stop charging, the screen will shut off.

3. To accomplish 2A charge current, we recommend

to use a wall adapter with an output of 5V/2A.

4. We recommend using only the supplied cable to

charge your mod.

IMPORTANT INFORMATION ABOUT USING

NICOTINE CONTAINING E-LIQUIDS

Before using nicotine containing e-liquid the user

should read the following information carefully.

NICOTINE CONTAINING E-LIQUID:

Do not use if you are allergic to nicotine or any of the

other ingredients contained within the e-liquid (see

manufacturer’s label for full details).

WARNINGS AND PRECAUTIONS:

Nicotine containing e-liquid are not recommended

for:

• Non-smokers

• Young people under the legal age;

• Pregnant or breast-feeding women; as nicotine is

known to cross the placenta and to be excreted in

breast milk;

• Those experiencing general ill health; such as heart

disease, stomach and duodenal ulcers, liver or

kidney problems, long term throat disease or

difficulty breathing due to bronchitis, emphysema or

asthma;

• Those who have an overactive thyroid gland or

have a pheochromocy toma (a tumor of the adrenal

gland that can affect high blood pressure);

• Those who have diabetes, as nicotine may affect

your blood sugar levels.

• Those taking the following medication;

• Theophylline (to treat breathing problems)

• Ropinirole (to treat restless leg syndrome)

• Clozapine (to treat schizophrenia)

POSSIBLE SIDE EFFECTS:

If you inhale too much nicotine or use the product

too much you may experience one or more of the

following effects:

• Feeling faint;

NX40 Mod User Manual

Fire Button

0.86 Inch

OLED

Screen

“-” Button

“+” Button

Type-C

Charging

Port

• Nausea (feeling sick)

• Headache

• Coughing

• Irritation of the mouth or throat

• Dizziness

• Stomach discomfort

• Hiccups

• Nasal congestion

• Vomiting (being sick)

• Heart palpitations

• Abnormal heart rate

If you experience any of these side effects; including

any possible side effects not listed in this leaflet,

discontinue using the product, if the effect(s)

continue after you stop use, consult your doctor or

healthcare professional and bring this leaflet to their

attention.

Safety note:

To avoid misfiring always ensure you either lock or

switch off your device when it is not in use.

Especially when carrying your device in your pocket,

bag or purse.

510 Connector

MADE IN CHINA

Manufactured By Eigate

To learn more about our products and how to use, please

visit: www.aspirecig.com

Floor 1-4, Building 3, No.14 Jian'an Road, Shajing

Sub-district, Bao'an District, Shenzhen, Guangdong

Province, China

Tel: +86-755-81499783

Email: service@aspirecig.com

Shenzhen Eigate Technology Co., Ltd.

Hello there, I have an aspire nx40 and the screen keeps blinking locked click 5×, so I press the fire button 5× but it just keeps blinking the same message over and over again. How can I fix this? Many thanks. Submitted on 17-1-2023 at 00:45
Reply Report abuse
Hello there, I have an aspire nx40 and the screen keeps blinking locked click 5×, but when I click the fire button it does nothing and it just keeps blinking the first message over and over again. How can I fix this? Many thanks. Submitted on 17-1-2023 at 00:43
Reply Report abuse
Why is my device showing to hot when trying to fire it Submitted on 8-12-2022 at 19:38
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aspire NX40 Mod in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspire NX40 Mod

Aspire NX40 Mod User Manual - German - 1 pages

Aspire NX40 Mod User Manual - Dutch - 1 pages

Aspire NX40 Mod User Manual - French - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aspire NX40 Mod Manual

Product: