592661
28
Zoom out
Zoom in
Previous page
1/32
Next page
23
TO SET AND USE “DOUBLE REPEAT TIMER”
TIMER MODE
Two timers repeat counting down the respective set times alternately as many times as necessary.
[1]
Keep Button “B” pressed for more than 2 seconds in the TIMER Mode. The Timer
Setting Display appears, and the digits of the number of repetitions start ashing.
* Unless the timer has been reset, the Timer Setting Display will not appear. For the method
of resetting the timer, see “To Start, Stop and Reset Timer” below.
[2] Press Button “A” or “D” to set the ashing digits.
* If Button A” or “D” is kept pressed for more than 2 seconds, the digits move quickly.
[3] Press Button “E” to show the next digits to be adjusted (ashing).
[4] Repeat Steps [2] and [3] to set the digits in the order shown in the illustration at
right.
[5] After all the adjustments are completed, press Button “B” to return to the TIMER
Mode. All the settings are registered in memory.
* If the watch is left untouched in the Timer Setting Display with the digits ashing, the display
will automatically return to the TIMER Mode in 2 to 3 minutes.
Timer Setting Procedure
To Start, Stop and Reset Timer
TIMER-1 TIMER-2
TIMER-1 TIMER-2
TIMER-1 TIMER-2
TIMER Mode
TIMER-1
TIMER-2
1. Timer operation
Press Button A” to start TIMER-1. The ashing Timer mark ” is shown while the
timer is counting down.
When TIMER-1 has nished counting down the set time, TIMER-2 starts countdown. If
“2” or more is set for the number of repetitions, both timers repeat counting down the
respective set times alternately for the number of times you have set.
The time-up warning beep starts beeping 3 seconds before each timer nishes
counting down, and the time-up beep sounds for 3 seconds when the respective set
times are up.
The time-up beeps for TIMER-1 and TIMER-2 sound differently from each other.
To stop the time-up beep, press any of the buttons.
When both timers have nished counting down the respective set times for the set
number of times, they are automatically reset.
2. To stop timer during countdown
Press Button A” to stop the timer. The Timer mark stops ashing.
* When the time-up beep is sounding, press any of the buttons to stop it, and then, press Button “A” to
stop the timer.
To restart the countdown, press Button A.
By pressing Button A” while the timer is stopped, it will be reset.
Timer Setting Display
Displayed
alternately
* When the TIMER Mode appears, “TIMER” is shown in the upper row of the
display for 1 second, and then, the Timer Display appears.
Button “B”:
Returning to TIMER Mode
Button “C”:
Turning on backlight
Button “C”:
[Press for more than 2 seconds]
Returning display to
TIME Mode
Button “B
:
[Press for more than 2 seconds]
Activation of Timer Setting
Display
Button “D”:
Decreasing digits to be adjusted
Button “E”:
Reset
Selection of digits to be adjusted
Button “A”:
Start / Stop
Increasing digits to be
adjusted
* While the Interval Timer function is in use,“CHR in USE”
is displayed, and the TIMER function cannot be used.
Number of repetitions
Press for
more than
2 seconds.
Hour
Minute
Seconds
Hour
Minute
Seconds
Number of
repetitions
Start
Time-up beep
End of
TIMER-1
End of
TIMER-2
Timers repeat counting down for
the number of times you have set.
From 10 seconds up to 99 hours 59 minutes and 59 seconds can be set for each timer.
By setting “00:00’00”” for TIMER-2, TIMER-1 can be used alone as an independent
timer.
[ TIMER-1 ]
[ TIMER-2 ]
AH01-WJ30WJ31_英語版.ai 1 2013/02/24 21:35:10
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asics AH01-WJ31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asics AH01-WJ31 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info