517470
2
Zoom out
Zoom in
Previous page
1/6
Next page
Helpline No. UK/Northern Ireland 020 79176050 Helpline No. UK/Northern Ireland 020 79176050 Helpline No. UK/Northern Ireland 020 79176050 Helpline No. UK/Northern Ireland 020 79176050
Rep. Ireland 0044 20 79176050 Rep. Ireland 0044 20 79176050 Rep. Ireland 0044 20 79176050 Rep. Ireland 0044 20 79176050
Web Support krippl@krippl-watches.com Web Support krippl@krippl-watches.com Web Support krippl@krippl-watches.com Web Support krippl@krippl-watches.com
Page 2
After Sales Support
Now you have purchased an Ascot product you can rest assured in the
knowledge that as well as your 3 year parts and labour warranty you
have the added peace of mind of dedicated helplines and web support.
What your three year warranty means:
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as fast as
possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the
product, please contact us via our helpline support services, details of
which are to be found in this manual.
This warranty does not affect your statutory rights.
2.12 Contents
1 base station
1 external sensor
1 x 1.5v AA batteries for the base station
2 x 1.5v AAA batteries for the external sensor
1 set of operating instructions
Tip: Not included in the pack are further external sensors or sensor
extension cable for the external sensors.
3 Display and function keys
3.1 Base station
Front view of the base station
- Time, date, alarm
Radio clock time / quartz clock
Displays day, month and day of the week
Time in 12 or 24-hour clock format
Time zone setting +/- 12 hours
2 alarm settings with snooze function
Transmitter call function for the radio clock time
Radio tower symbol
- External temperature and air humidity display
External temperature for up to 3 external sensors:
- current reading
- min/max memory
- display in °C / °F
- trend display:
External air humidity for up to 3 external sensors:
- current reading
- min/max memory
- trend display
Display of selected external sensor or automatic switching between
sensors
Low battery indicator for external sensors
- Internal temperature and air humidity display
Internal temperature: - current reading
- min/max memory
- display in °C / °F
- trend display
Interior air humidity: - current reading
- min/max memory
- trend display
Low battery indicator for base station
- Weather forecast
Weather forecast with 5 symbols
Weather tendency
- Air pressure
Air pressure display:
- Display in hPa
- min/max memory
- Air pressure diagram
Display of the development of air pressure over the past
12 hours in 5 stages
- Moon phase, time of sunrise and sunset, time of moonrise and
moonset
Phase of the moon
Time of sunrise and sunset
Time of moonrise and moonset
Select region and city
- Light
View of base station from above
Rear view of base station
3.2 External sensor
Front view of external sensor
Rear view of external sensor
4 Putting the device into operation
We recommend that you read the operating instructions carefully before
using the Weather Station for the first time. In particular, before using
the device for the first time, please read point 3.1, Base station and point
3.2, External sensor to become familiar with the Weather Station’s
function keys.
Put the device into operation on a table where you can lay the base
station and the external sensor next to each other or stand them upright
1. Remove the battery compartment cover located at the rear of
the base station.
2. Also remove the battery compartment cover located at the rear
of the external sensor. First push the retractable stand in the
direction of the arrow so that you can remove the battery
compartment cover. Please unscrew the battery compartment
cover using a small screwdriver.
Tip: Please note that the batteries must be inserted in the base
station first and then in the external sensor otherwise the base
station may fail to receive the external sensor’s signal.
3. First insert the 2 x 1.5V AA batteries in the base station’s
battery compartment (note +/- polarity).
Tip: Please ensure that the batteries are new and are the correct
size.
When you have inserted the batteries correctly, this will be
confirmed by an audible tone. Now you can close the battery
compartment again with the compartment cover.
4. Then insert the 2 x 1.5V AAA batteries in the external sensor’s
battery compartment (note +/- polarity). Leave the battery
compartment open so that you can set more settings.
Tip: Please ensure that the batteries are new and are the correct
size.
5. Shortly after inserting the batteries, the base station will begin
to search for the DCF77 signal for the radio clock, indicated by
the flashing radio tower symbol.
Radio tower symbol
The base station will receive the radio clock signal within 4 minutes and
this will be displayed by a constant radio tower symbol. If this is not the
case (the radio tower symbol will not be visible), then press the ‘–
key until you hear a signal tone. The radio tower will appear and it will
try for another 4 minutes to receive a radio clock signal. If it is not
possible to receive a signal at the location of use, you can set the time
manually (see point 5.1.2, Manual setting) or alter the location of the
base station (see point 9, Troubleshooting).
Tip: The search process will be interrupted if you press the ‘+ ‘, or ‘–
‘ or the LIGHT/SNOOZE key.
6. After inserting the batteries, the external sensor will begin to
transmit the measured temperature and air humidity, seen by
the flashing of the red indicator on the front of the external
sensor. The displays for the external temperature and the
1
4
5
3
2
6
7
1
2
3
4
5
6
7
Connector for
sensor extension
cable (not
included)
Display for external
temperature in
°C/°F and humidity
TX ke
y
C/F ke
y
Retractable
stan
d
Channel
Hanging kit for
wall assembl
y
Batter
y
Batter
y
com
p
artment
Screws for battery
compartment cover
Battery
com
p
artment
Battery-change
indicator
Stan
d
Transmitting
signal indicator
Channel
indicator
LIGHT/SNOOZE key
SET/ZONE key
CHANNEL ke
ALARM key
MIN/MAX key
CLEAR
SET
BARO key
‚+ key
‚- key
B key
B key
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ascot AUK-WS-33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ascot AUK-WS-33 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info