702727
11
Zoom out
Zoom in
Previous page
1/12
Next page
Appendix
Copyright 1996 WARNING-Opto-Elektronik GmbH & Co Produktions KG
changes reserved
10
6 Completion work
Before switching on the equipment make sure that the following conditions are fulfilled:
adjustments at the receiver are all correct
optimum alignment of transmitter and receiver
are all cables tight in the connecting terminal
check voltage supply at transmitter and receiver
in case of beam interruption LED must light up at the receiver and the alarm
relay must be released for 5 sec. at least
check sabotage line, when cover has been removed sabotage line must response
attach cable release to the cable
set up cover and tighten screws
for VdS-applications screws must be fixed either with adhesive lead or lead wire
7 Maintenance
It is recommended to open the device once a year in order to check its general condition or if there are
any damages.
When the optic is dirty it can be removed by a anti-static tissue. Use only mild detergents. Please re-
check alignment after cleaning procedure.
8 Appendix
8.1 Technical data
8.1.1 Transmitter/Receiver
single unit moulded column
operating voltage
10 - 18V DC
max. waviness 2Vss
current consumption
50mA ea. pair
range
Indoor 160 m
Outdoor 100 m
elapse time
10sek.
alarm output
Potential-free relay contact
Max. load 200 V DC, 0.5 A,. max. circuit breaking capacity 10W
alarm response time
20 / 50 / 150 / 300ms, at coding plug adjustable to receiver,
at VdS-application fixed setting to 20ms
operating lag
5sek.
technical alarm
Electronic exit, open-collector against minus,
max. load 12 V DC, 50 mA operating lag approx. 1.5 sec.
tamper Potential-free switch contact
Max. load 100V DC, 0.2 A
infrared beam
Wave length 940nm
IR-impulse length 20us
Keying ratio 1:400
Beam width 2,1°
alignment angle
Horizontal ±95°
Vertical
±
10°
environment class
II, acc. to VdS 2110
operating
temperature
-5°C - +55°C
-30°C - +55°C, with heaters
air humidity
98%
housing
Die cast aluminium housing acc. to DIN 1725,
black, alloy GD-Al Si, IR exit through black Plexiglas window
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech DO560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech DO560 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info